Conversion of waste polyolefins into iso-alkanes or aromatics via coupled methanol decomposition-hydrocracking
Hydrogen availability also affects their relative formation: hydrogen-lean conditions can favor aromatization, whereas an absence of hydrogen may promote coke formation and compromise catalyst stability [35]. Controlling hydrogen supply is therefore important for balancing product selectivity and catalyst stability. Although recent advances have been made in methanol-assisted polyolefin conversion
The meta-Chloro Substituent Enhances Molecular Weights of Polyethylene Elastomers, Achieving Exceptional Mechanical Perf
15 November 2026 ormance ... School of Pharmaceutical Sciences, Changchun University of Chinese Medicine, Changchun 130117, China 2 Laboratory of Engineering Plastics, Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China ... Molecules2026, 31(22), 4127;https://doi.org/10.3390/molecules31224127 ... Abstract Achieving high
Fine Tuning of Catalyst Active Sites to Access Advanced Ultrahigh-Melting Polyolefins
Polyolefins with melting temperatures above 200°C are rare, as their synthesis typically relies on the polymerization of highly sterically congested α-olefins, which is challenging for both industrial Ziegler–Natta and homogeneous catalysts. Pyridylamido-Hf complexes are molecular catalysts known for their high activity and ability to incorporate sterically demanding monomers, for example, allyltr
天津大学《自然·通讯》:实现混合废塑料高效制芳烃
2026-11-14 16:20:51 来源: 高分子科学前沿 浙江 举报 ... 聚烯烃占全球塑料生产的大部分,但其饱和、化学均一的C–C骨架难以选择性官能化;分子筛微孔虽能促进择形环化和芳构化,却因长聚合物链难以进入微孔而形成“可及性—选择性”冲突。传统体系中,裂解与芳构化常在相近温度和时间窗口内并发,动力学上耦合中间体生成与消耗,限制芳烃收率和过程效率;一锅路线(包括共反应物辅助)常依赖稀缺贵金属且产物分布宽,两步热解-芳构化又面临中间体生成不可控和系统复杂等问题。如何在保证聚合物可及性的同时发挥微孔择形芳构化优势,成为聚烯烃制芳烃的关键挑战。 针对这一矛盾,天津大学巩金龙教授、付东龙教授合作,提出在单一反应器中用串联催化剂将聚烯烃裂解与选择性芳构化在时间上解耦:自柱撑五元环分子筛SPP在低温快速、程序性地裂解聚烯烃为小烯烃中间体,改性MFI分子筛MFI-m在较高温度完成择形芳构化
Selective aromatization of polyolefins by temporal decoupling from cracking - Nature Communications
Abstract Cracking of polyolefins is a prerequisite for their selective conversion over microporous zeolites to value-added small molecules such as monocyclic aromatics. However, cracking and aromatization often proceed concurrently, creating an intrinsic accessibility-selectivity conflict that limits aromatic yield and productivity. This paper describes a strategy that temporally decouples polyol
Hydrogen-free cracking of low-density polyethylene to produce LPG and gasoline-range hydrocarbons over hierarchical nano
The nano-sized HZSM-5 zeolites catalyzed the conversion of LDPE at 340 °C, achieving a conversion of 65.3%, with the products consisting primarily of C1-C4 hydrocarbons [51]. In the hydrocracking of LDPE at a hydrogen pressure of 60 bar, the Ni/Beta catalyst tends to produce C5-C12 alkanes in the gasoline range [52]. During the hydrogenation of model PE pyrolysis oil, reducing the acidity of the N
Catalytic upcycling of waste polypropylene into light aromatics over bimetallic Ga-Zr modified hollow ZSM-5 under CO2 at
Feng et al., 2021; Ham et al., 2019; Schumann et al., 2015). Moreover, Ga-modified zeolites have been widely recognized as highly effective aromatization catalysts because Ga species can accelerate the dehydrogenation of olefinic intermediates and promote cyclization–aromatization reactions (Schreiber et al., 2018). In particular, Ga incorporation has been reported to enhance the formation of mono
Advances in Preparation and Applications of Disentangled Ultrahigh Molecular Weight Polyethylene - In non-metallocene sy
Ning et al. successfully developed a series of β-diketonate titanium(IV)/diethylaluminum chloride catalytic systems [61]. This is the first report of such catalytic systems for the one-reactor synthesis of bimodal polyethylene (polyethylene wax PEW/UHMWPE) and d-UHMWPE. By regulating the polymerization conditions and the catalyst structure, the content of the PEW component in the product can be ef
聚丙烯产业需“两条腿走路”:低成本与高端化协同并进
... 作者:杨艺 来源:中化新网 2026年10月19日 收藏 ... 另一方面探索生存上限、冲高端,加快茂金属PP、高洁净医卫料等进口替代,以控总量、优结构、强创新、新标尺推动增长由规模扩张转向价值创造。 ... 茂金属PP、高透明PP、高抗冲共聚("三高")聚丙烯等高端牌号的进口依存度仍然偏高——据行业统计,茂金属PP国内进口依存度在80%以上,"三高"聚丙烯超过60%,高透明等高端专用料也多在40%以上,自主保障能力仍有待提升。 ... 陈锟强调,当前,PP进口集中在高附加值牌号,包括高端薄膜料、高洁净医卫料、茂金属系列产品等,单价普遍高于出口通用料。 ... 从聚丙烯牌号谱系看,要在均聚、无规共聚、抗冲共聚的基础上,加快补齐以下重点方向:茂金属PP、高熔体强度聚丙烯、高透明无规共聚、薄壁注塑专用料、低VOC车用聚丙烯、锂电隔膜专用料、医用高洁净料、单一材质可回收包装料。 ...
茂金属聚乙烯
热塑性塑料 茂金属聚乙烯是以茂金属配位化合物为催化剂合成的新型热塑性塑料,属于高端聚烯烃产品。该材料由德国汉堡大学Kaminsky团队在1980年发现催化体系,1991年美国埃克森公司率先实现工业化生产。其产品相比传统聚乙烯具有更优的力学性能、光学性能和加工性能,生产工艺主要包括Unipol气相法、DOW化学溶液法和Borstar淤浆法 [1] [8]。 国内企业持续推进该产品的工业化生产与催化剂国产化,2023年以来中国石油广东石化、兰州石化等企业相继在茂金属聚乙烯产品与自主催化剂长周期工业应用方面取得进展 [3-4] [26-27]。2024年国内茂金属聚乙烯产量约35万吨,自给率为11.7% [10] [21]。据预测,2025年中国茂金属聚乙烯总产能预计将突破700万吨 [20]。埃克森美孚大湾区惠州项目计划建设120万吨/年茂金属聚乙烯生产线 [2]。该项目于2025年7月建
寧夏煤業高端聚丙烯四款新品量產填補國內空白
2026年09月12日09:32 | 來源:寧夏日報 ... 9月11日,記者從國家能源集團寧夏煤業有限責任公司獲悉,寧夏煤業實現丙丁二元聚丙烯FB6005、MB6440、MB6430及乙丙丁三元聚丙烯FC5908工業化萬噸級量產,填補國內空白,同時也是國內唯一擁有煤基三元無規共聚聚丙烯生產技術的企業,在煤基烯烴原料開發三元無規共聚聚丙烯新產品和新技術領域處於國際先進水平。 近年來,寧夏煤業緊密圍繞國家能源化工產業技術升級的重大需求,聚焦突破高端聚烯烴新材料國產化的關鍵技術瓶頸,實現了煤基低碳烯烴資源的高值化利用。以煤基乙烯、1-丁烯與丙烯為原料,將聚丙烯、聚乙烯及裂解裝置系統集成與流程再造,構建了低成本、連續化生產裝置。同時,突破傳統共聚工藝局限,採用“預聚合+高含量單體共聚”兩步法聚合工藝,融合“氣相雙反應釜工藝+抗靜電技術”等創新技術,形成了一套完整的煤基丁烯共聚聚丙烯生產工藝技術
什么是茂金属催化剂?核心优势是什么?高端聚烯烃与POE国产化趋势
2026-09-10 ... 茂金属催化剂是高端聚烯烃国产化的关键,POE等产品完全依赖进口。本文从定义、优势、应用与国产替代出发,解析茂金属催化剂行业及鼎际得的布局进展。 茂金属催化剂定义、分类与核心优势 茂金属催化剂是指以茂金属化合物为主催化剂、甲基铝氧烷或有机硼化合物为助催化剂的单活性中心催化剂。与传统齐格勒-纳塔催化剂相比,茂金属催化剂可更精确地控制聚合物分子结构,生产性能优异的聚烯烃树脂。 茂金属催化剂主要包括茂金属聚乙烯(mPE)、茂金属聚丙烯(mPP)、茂金属聚烯烃弹性体(POE)、茂金属聚烯烃润滑油(PAO)和茂金属聚烯烃蜡等,由单体通过茂金属催化剂进行聚合。 茂金属催化剂在高端聚烯烃中的应用 茂金属聚乙烯具有拉伸和抗冲击强度更优、热封温度较低、热封强度较高、透明度更好、雾度值更低等优势。密度相近的传统聚乙烯和茂金属聚乙烯具有相近模量和屈服应力,茂金属聚乙烯断裂伸长率