Conversion of waste polyolefins into iso-alkanes or aromatics via coupled methanol decomposition-hydrocracking
Hydrogen availability also affects their relative formation: hydrogen-lean conditions can favor aromatization, whereas an absence of hydrogen may promote coke formation and compromise catalyst stability [35]. Controlling hydrogen supply is therefore important for balancing product selectivity and catalyst stability. Although recent advances have been made in methanol-assisted polyolefin conversion
Skip to main contentSkip to article
Published by: Elsevier
Published by
Highlights
· •Hierarchical Ni/Hβ-c catalysis coupled with methanol decomposition-PE hydrogenolysis.
· •PE upgrading to C5-C16 yields 80 wt% with >8 g g−1cat h−1 productivities.
· •Aromatic and i-alkane are tunable by methanol-derived H-rich and H-lean environments.
· •Ni2+-associated LAS facilitate H transfer from methanol to hydrogenolysis.
· •Methanol-derived H supply mode exhibits a higher RC-C scission than external H2.
Abstract
Conversion of waste polyolefins into liquid fuels remains a major challenge as global polymer use grows. Herein, coupled methanol decomposition-hydrocracking of polyolefins over a hierarchical zeolite-supported nickel catalyst (Ni/Hβ-c; 10 wt% nano-scale Ni) converts polyethylene (PE) to either aromatic (H-lean environment) or isoalkane (H-rich environment) liquid products. PE is converted into C5-C16 hydrocarbons (280 °C, 1 h) in methanol, affording 80 wt% yields and > 8 g g−1cat h−1 productivities, higher than noble-metal catalysts in methanol, driven by hydrogen supply mode and accessible acid sites of Ni/Hβ-c. Hierarchical pores of Ni/Hβ-c promote transformation of waxes to liquid products; Ni0 sites catalyze methanol decomposition to generate hydrogen; Ni2+-associated Lewis acid sites facilitate hydrogen transfer to PE hydrocracking; accessible Brønsted acid sites enable CC bond β-scission. Methanol primarily serves as a hydrogen mediator, continuously generating hydrogen that accelerates β-scission to 71.4 mmol h−1, with rates remaining high even under external H2 (53.7 mmol h−1). Isotope-labeling experiments revealed distinct transfer pathways for methanol-derived hydrogen and carbon: hydrogen is incorporated into both aromatics and isoalkanes, whereas carbon is incorporated exclusively into aromatic substituents via alkylation. The Ni/Hβ-c catalyst integrates methanol decomposition with PE hydrocracking, regulates H-rich and H-lean environments through the methanol-to-PE ratio, and establishes a dynamic hydrogen-control mechanism that governs competition between alkene cyclization–dehydrogenation and hydrogenation pathways, thereby achieving tunable conversion of PE to aromatics and isoalkanes.
Graphical abstract
Keywords
Hierarchical zeolite
;
Heterogeneous catalysis
;
Waste plastics
;
External-H2-free
;
Liquid fuel
Introduction
Plastic wastes are projected to exceed 25 billion tonnes by 2050 [1], with polyolefins comprising ~60% of this total due to their durability and resistance to degradation [2]. Currently, less than 10% of plastics are recycled, and 90% are either burned, landfilled, or fragmented into ever smaller particles (e.g., micro- and nanoplastics, MNPs), causing irreversible planet pollution, human disease, and even human fatalities [3]. In 2022, UN member states approved the Global Plastics Treaty to prevent, reduce, and end global plastic pollution [4]. While mechanical recycling may allow limited carbon recycling, efficient methods to selectively convert waste polyolefins into high-quality chemical products have yet to achieve industrial maturity [5]. Given that about 98% of virgin plastics are derived from fossil fuel-based feedstocks [6], reprocessing used plastics into energy fuels could recover part of the material's embedded chemical energy and displace some fossil-derived feedstocks. Targeted cleavage of inert C(sp3)-C(sp3) bonds is key to transforming polyolefins [7]. Chemical conversion aims to deconstruct internal CC bonds of polyolefins without breaking terminal groups [8], supporting sustainable management of plastic waste and providing an alternative source of hydrocarbon fuels.
Among chemical recycling methods, hydrocracking has emerged as a leading route for polyolefin upgrading due to its mild conditions (below 300 °C) [9] and high selectivity toward liquid fuels [10]. However, hydrocracking relies on an external H2 feed [11], introducing additional requirements for hydrogen transportation, storage, handling, and safety management, together with the associated infrastructure and operating costs (Scheme 1) [12]. For commercial implementation, there is strong incentive to develop plastic waste recycling processes that minimize or avoid external hydrogen. Therefore, recent efforts have focused on self-supplied hydrogen strategies, such as layered self-pillared zeolites [13], acid-modified SO4/ZrO2-Al2O3 [14], and WZr-KIT-6 + HZSM-5 dual-catalysts [15], which facilitate the transfer of hydrogen from the solid phase to the liquid-phase products, as well as methanol aqueous phase reforming [16] and liquid organic hydrogen carriers [17] for hydrogen generation (Scheme 1). Although these methods enable PE conversion into liquid fuels or waxes, they face notable limitations. For example, self-supplying hydrogen strategies currently exhibit low productivity (ca. 1 g g−1cat h−1) [13] and prolonged hydrogen transfer times (4–24 h) [14]. Aqueous phase methanol reforming strategies have low selectivity toward liquid fuels, particularly gasoline and jet-fuels, and require additional aqueous phase separation steps [16]. These challenges can be addressed by developing a catalyst that integrates hydrogen generation via methanol decomposition with PE activation and pre-cracking (Scheme 1).
The key to hydrogen generation from methanol is by activation and breaking of the methanol CH bonds [18]. Similarly, polyolefin depolymerization likewise involves CH activation and subsequent CC bond cleavage [19]. These parallel reactions provide the foundation for the current study on coupled catalytic cleavage of methanol and PE depolymerization. The high activity of noble metals Pd [20], Pt [21], and Ru [22] to cleave CH bonds is widely recognized. Recent work on Ni/Nb2O5 has demonstrated that a non-noble-metal Ni catalyst can convert LLDPE into liquid-product yield at 250 °C under 3 MPa external H2 for 4 h [23]. Ni metals can also induce direct methanol decomposition to generate hydrogen by activation of the CH bond [24], while zeolite-supported Ni can improve the ability for (de)hydrogenation and acidity (L/B) to enhance PE conversion [25]. Nanoparticle dispersion may also be a factor in catalyst design, as shown by Zhang et al. [26], who reported that ammonium citrate (ac) can transiently coordinate Ni2+ species and moderate their mobility during reduction. Pore structure and strong acidity of catalysts are necessary for polyolefin cracking and controlling product distribution [27]. Hierarchical zeolites with mesopore structures and strong Brønsted acid sites tend to promote ultra-narrow liquid product distributions [28]. However, conventional dealumination and desilication treatments suffer from framework collapse and acidity loss [29], while template-based methods remain costly. Hexadecyl trimethyl ammonium bromide (CTAB) has been reported to act as a structure-directing agent, protecting the zeolite framework during desilication via hydrophobic interactions to generate hierarchical structures [30]. Thus, this work uses CTAB to assist in the structural control of the zeolites.
A common goal is to produce C5-C21 liquid fuels rather than low-value gaseous hydrocarbons and waxes [31]. Hydrogen-lean conditions limit PE hydrocracking and result in poor selectivity for liquid products [32], whereas hydrogen-rich conditions increase surface hydrogen coverage, which inhibits the adsorption and CC bond cleavage in PE chains [33]. Continuous hydrogen supply via methanol decomposition holds promise for promoting PE hydrocracking under constraints imposed by hydrogen-transfer kinetics. However, separation of liquid products requires controlling the relative production of alkanes and aromatics, because their similar boiling points can give rise to azeotropes [34]. Hydrogen availability also affects their relative formation: hydrogen-lean conditions can favor aromatization, whereas an absence of hydrogen may promote coke formation and compromise catalyst stability [35]. Controlling hydrogen supply is therefore important for balancing product selectivity and catalyst stability. Although recent advances have been made in methanol-assisted polyolefin conversion to C9+ alkylaromatics [36], [37], challenges in controlling the relative formation of alkanes and aromatics and separating products with overlapping boiling points remain unresolved. In our recent study [36], methanol acted as a hydrogen sink and methyl donor over NiGa/ZSM-5-H, promoting PE aromatization to maximize the aromatics yield and the incorporation of methanol-derived carbon into aromatic substituents through Friedel–Crafts-type alkylation. That study focused on how methanol-derived carbon affects C9-C10 alkylaromatic production. The present work investigates the complementary role of methanol-derived hydrogen in PE hydrocracking, particularly its effects on liquid yield and alkane-aromatic selectivity. Together, the two studies suggest a “hydrogen‑carbon dual-flow” framework: methanol-derived H-flow governs alkane-aromatic competition, while methanol-derived C-flow controls aromatic alkylation degree.
This work integrates mechanistic and reaction-system factors that govern alkane- and aromatic-forming pathways into catalyst design for a coupled methanol decomposition–hydrocracking system for polyolefin conversion, enabling tunable product distributions that can be directly processed into fuel fractions (Scheme 1). The strategy centers on catalytic methanol decomposition to generate hydrogen and its subsequent transfer to PE hydrocracking, where the methanol-to-PE mass ratio (methanol equivalent) regulates hydrogen supply to govern the competition between cyclization–dehydrogenation and hydrogenation pathways. In the catalyst design, hierarchical mesoporosity was controlled through CTAB-assisted NaOH desilication to enhance PE chain accessibility, while the framework Si/Al ratio was adjusted to modulate Brønsted acid site density for β-scission and cyclization. Hβ and HZSM-5 were used to validate the method for preparing hierarchical zeolites. To exploit methanol decomposition, monometallic Ni nanoparticles were incorporated into the hierarchical zeolite to generate Ni0 and Ni2+ active sites that facilitate methanol decomposition and hydrogen transfer, where the resulting metal–acid balance was hypothesized to direct alkane- and aromatic-forming pathways. Ammonium citrate was used for Ni loading in several trials to assess Ni nanoparticle dispersion in the zeolite framework.
This work advances beyond previously reported methanol-reduction pathways [36], by exploiting a methanol decomposition-driven hydrogen-supply mechanism that creates tunable H-rich or H-lean environments for coupled methanol decomposition–hydrocracking to achieve product selectivity. To achieve the targeted structural attributes, a CTAB-assisted NaOH desilication method (denoted as -c, Table S1) was developed to prepare the Ni/Hβ-c catalyst, which exhibits enhanced H2 adsorption capacity and strong acid sites. Material attribute–performance relationships show that these features contribute to methanol decomposition, hydrogen transfer, and CC bond β-scission. Isotopic-labeling experiments over comparative catalysts were used to demonstrate that methanol decomposition-derived hydrogen species catalyzed by Ni/Hβ-c were incorporated into the aromatic and i-alkane products. In-situ infrared (in-situ IR) spectroscopy was employed to probe the evolution of functional groups of PE and methanol over the Ni/Hβ-c catalyst, and, together with kinetic studies, was used to elucidate the mechanistic pathways of the reactions.
Organizational access
Get full-text access by signing in with your organisation
Section snippets
Catalyst preparation
In the synthesis process of hierarchical pore zeolite, an amount of β-zeolite was calcined at 550 °C for 5 h to obtain Hβ. Hβ (5.0 g, initial Si/Al ratio of 25) was added to 150 mL of an aqueous solution containing 0.2 M NaOH and 0.018 M CTAB. The suspension was stirred at 70 °C for 1 h for Hβ desilication pretreatment. The purpose of CTAB-assisted NaOH desilication was to increase accessible mesoporosity while retaining a useful microporous acid framework. The mixture was then filtered, washed
Tunable catalysis for PE hydrocracking
Previous studies have confirmed that Ni catalysts are effective in both methanol decomposition [40] and PE hydrocracking [41]. In this work, PE hydrocracking was conducted with methanol as the in-situ hydrogen source, without the addition of external H2. Ni nanoparticles supported on a zeolite framework catalyzed methanol decomposition (Fig. S5), generating H2 and CO in a stoichiometric ratio of 2:1 (Table S3; Eq. S1). Methanol can also react with H2 through methanol reduction to form CH4 and H2
Conclusion
In conclusion, a coupled methanol decomposition-hydrocracking strategy over Ni/Hβ-c enables tunable conversion of polyolefin waste into i-alkane and aromatic species. Ni0 functions as the active site for methanol decomposition, continuously generating hydrogen to substitute for external H2. Ni2+-associated LAS promote hydrogen transfer that drives isomerization and aromatization during PE hydrocracking. Methanol promotes PE interaction with the zeolite framework oxygen, while hydrogen species
CRediT authorship contribution statement
Sheng-Ren Li: Writing – original draft, Visualization, Methodology, Investigation, Formal analysis, Data curation, Conceptualization. Richard L. Smith: Writing – review & editing, Supervision, Methodology. Janusz A. Kozinski: Writing – review & editing, Supervision. Zhen Fang: Writing – review & editing, Supervision, Funding acquisition.
Declaration of competing interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Acknowledgements
This work was supported by the National Foreign Expert Individual Human Project (S20240137), Nanjing Agricultural University (68Q-0603), Jiangsu Provincial Department of Education-Jiangsu University Brand Building Project (Z562119327), and Program of China Scholarship Council (202606850024).
View full text
References (66)
· P.J. Landrigan et al.
The lancet countdown on health and plastics
Lancet
(2025)
· M. Khzouz et al.
Catalytic performance of Ni-Cu/Al2O3 for effective syngas production by methanol steam reforming
Fuel
(2018)
· H.S. Ran et al.
Precise activation of C-C bonds for recycling and upcycling of plastics
Chem. Sci.
(2024)
· C.A. Emeis
Determination of integrated molar extinction coefficients for infrared-absorption bands of pyridine adsorbed on solid acid catalysts
J. Catal.
(1993)
· J.W. Shabaker et al.
Aqueous-phase reforming of methanol and ethylene glycol over alumina-supported platinum catalysts
J. Catal.
(2003)
· T. Kwon et al.
Complementary acid site mechanisms in hydrogen-free polyethylene upcycling: elucidating the distinct roles of Brønsted and Lewis sites in Ce-modified zeolites
Green Chem.
(2025)
· M. MacLeo et al.
The global threat from plastic pollution
Sci
(2021)
· R. Geyer et al.
Production, use, and fate of all plastics ever made
Sci. Adv.
(2017)
· UNEP
Historic Day in the Campaign to Beat Plastic Pollution: Nations Commit to Develop a Legally Binding Agreement
(2022)
· Z.O.G. Schyns et al.
Mechanical recycling of packaging plastics: a review
Macromol. Rapid Commun.
(2021)
A unified view on catalytic conversion of biomass and waste plastics
Nat. Rev. Chem.
(2022)
Site-selective polyolefin hydrogenolysis on atomic Ru for methanation suppression and liquid fuel production
Research-China.
(2023)
A reusable, impurity-tolerant and noble metal-free catalyst for hydrocracking of waste polyolefins
Sci. Adv.
(2023)
Catalytic upcycling of high-density polyethylene via a processive mechanism
Nat. Catal.
(2020)
Conversion of polyolefin waste to liquid alkanes with Ru-based catalysts under mild conditions
JACS Au
(2020)
Hydrogen safety challenges: a comprehensive review on production, storage, transport, utilization, and CFD-based consequence and risk assessment
Energies
(2024)
Upcycling of polyethylene to gasoline through a self-supplied hydrogen strategy in a layered self-pillared zeolite
Nat. Chem.
(2024)
Production of branched alkanes by upcycling of waste polyethylene over controlled acid sites of SO4/ZrO2-Al2O3 catalyst
Angew. Chem. Int. Ed.
(2024)
One-pot catalytic conversion of polyethylene wastes to gasoline through a dual-catalyst system
Chem
(2025)
Tandem catalysis for plastic depolymerization: in situ hydrogen generation via methanol aqueous phase reforming for sustainable polyethylene hydrogenolysis
Angew. Chem. Int. Ed. Eng.
(2025)
Catalytic deconstruction of waste polyethylene with ethylene to form propylene
Sci
(2022)
Understanding the structure-activity relationships in catalytic conversion of polyolefin plastics by zeolite-based catalysts: a critical review
ACS Catal.
(2022)
Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization
Science (New York, N.Y.)
(2020)
Ni/Nb2O5 as a noble-metal-free catalyst for the chemical upcycling of waste polyolefin plastics
Chem. Eng. J.
(2025)
Insights into the mechanism of methanol steam reforming for hydrogen production over Ni-cu-based catalysts
ACS Catal.
(2022)
Pore-structure engineering of hierarchical β zeolites for the enhanced hydrocracking of waste plastics to liquid fuels
ACS Catal.
(2024)
Achieving super dispersed metallic nickel nanoparticles over MCM-41 for highly active and stable hydrogenation of olefins and aromatics
Chem. Eng. J.
(2023)
Micelles cascade assembly to tandem porous catalyst for waste plastics upcycling
Angew. Chem. Int. Ed. Eng.
(2024)
Ultra-narrow alkane product distribution in polyethylene waste hydrocracking by zeolite micro-mesopore diffusion optimization
Angew. Chem. Int. Ed. Eng.
(2024)
Mesoporosity - a new dimension for zeolites
Chem. Soc. Rev.
(2013)
Exploring the Synthesis of Mesoporous In/H-β-NC Catalysts by Desilication Using CTAB Combined with NaOH and Its Application in CH4-SCR of NO
Ind. Eng. Chem. Res.
(2024)
Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S1385894726118154
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。