研究院科研情报与新闻主站科研动态 · 行业情报 · 管理政策
2026年11月17日
首页 › 聚烯烃 › 正文

Hydrogen-free cracking of low-density polyethylene to produce LPG and gasoline-range hydrocarbons over hierarchical nano

ScienceDirect.com 2026-11-10 7 天前
The nano-sized HZSM-5 zeolites catalyzed the conversion of LDPE at 340 °C, achieving a conversion of 65.3%, with the products consisting primarily of C1-C4 hydrocarbons [51]. In the hydrocracking of LDPE at a hydrogen pressure of 60 bar, the Ni/Beta catalyst tends to produce C5-C12 alkanes in the gasoline range [52]. During the hydrogenation of model PE pyrolysis oil, reducing the acidity of the N
Skip to main contentSkip to article Published by: Elsevier Published by Highlights · •Fluoride-free vapor conversion yields hierarchical nano-Beta zeolites. · •Nano-Beta achieves 98.4% LDPE conversion without external hydrogen. · •Most converted products are directed to LPG and gasoline-range hydrocarbons. · •Brønsted acidity and diffusion govern catalytic performance. Abstract Hydrogen-free catalytic conversion of polyethylene is a highly promising pathway for fuel production, but achieving excellent catalytic activity and fuel selectivity remains a challenge. In this work, we report a hierarchical nano-Beta zeolites synthesized via a fluoride-free stream-assisted dry-gel conversion strategy, which exhibited excellent catalytic performance in the cracking of low-density polyethylene (LDPE) under N2 atmosphere at 290 °C and 1.5 MPa. Nano-Beta(20) achieved a 98.4% LDPE conversion, with a selectivity of 61.8% for liquefied petroleum gas (LPG, C3-C4) and 35.4% for gasoline-range hydrocarbons (C5-C12). Due to the high steric hindrance of polyolefins, the hierarchical nanostructure was beneficial to the diffusion of LDPE, enabling them to adsorb onto acid sites for cracking. Meanwhile, the hierarchical nanostructure provides the catalyst outer surface of the Nano-Beta(20) catalyst with more acid sites, which promoted the depolymerization of LDPE into LPG and liquid fuels. The characterization results indicated that catalytic performance depends on Brønsted acid sites and mass transfer, rather than solely on total acidity. Coke and recycling tests revealed a correlation between graded diffusion and catalyst utilization. These findings will provide theoretical guidance for the development of highly efficient catalysts for hydrogen-free polyolefin conversion under mild conditions. Graphical abstract Keywords Hydrogen-free cracking ; Low-density polyethylene ; Hierarchical nano-Beta zeolite ; LPG ; Gasoline-range hydrocarbons Introduction The accumulation of plastic waste has led to a series of environmental problem [1], [2], [3], [4]. Polyethylene (PE) is a major contributor to this problem due to its high production volume and widespread use in products with short lifespans [5], [6], [7]. Low-density polyethylene (LDPE) is commonly found in films, bags, and packaging materials [8], [9], [10], [11]. Under mild conditions, it is difficult to achieve upcycling [12]. Its saturated C-C backbone, chain branching, hydrophobicity, and high melt viscosity restrict chemical activation and contact with catalysts [13], [14], [15]. Mechanical recycling often results in downgraded products. Pyrolysis required high temperature and produced complex mixture of hydrocarbon [16], [17]. Therefore, the catalytic conversion of LDPE into high value-added chemicals is a highly promising route [18], [19], [20]. Currently, LPG and gasoline are primarily derived from petroleum pyrolysis. With the scarcity of petroleum resources, developing new production routes is of great significance for alleviating environmental issues and reducing dependence on fossil resources. Therefore, the catalytic conversion of LDPE into LPG and gasoline holds significant practical importance for achieving the resource utilization of waste plastics and mitigating environmental problems. Research on the cracking of polyethylene using solid acid catalysts has been studied for several decades. Yoshida et al. found that polyethylene degrades more rapidly on zeolites and silicoaluminates than through thermal cracking [21]. There were significant differences in the catalytic activity and product selectivity of polyolefins among the MCM-41, ZSM-5, and amorphous silicoaluminate catalysts [22]. Small-crystal β catalysts are capable of converting low-density polyethylene (LDPE), high-density polyethylene (HDPE), and polypropylene into products consisting primarily of gasoline-range hydrocarbons [23]. These research advances provide a theoretical foundation for the design of polyolefin depolymerization catalysts. Currently, various process routes for the upcycling of PE have been developed, including pyrolysis, hydrogenolysis, hydrocracking, tandem depolymerization, oxidative conversion, solvent-assisted depolymerization, and catalytic aromatization [24], [25], [26], [27]. Metal-catalyzed hydrogenolysis and hydrocracking can achieve high conversion and controlled product distributions [28]. However, these methods typically require external H2, high pressure, expensive metals, or complex catalyst structures [29]. Hydrogen-free routes external H2 the need for external hydrogen [30], [31]. Many H2-free systems must operate under harsh temperatures conditions [32], [33], [34]. Furthermore, they may generate excessive gases, suffer from rapid coking, or exhibit limited selectivity for LPG and gasoline-range products [35]. The aromatization and CO2-assisted routes can produce valuable aromatics or olefins [36]. However, this shifted the carbon flow away from balanced LPG/gasoline production. Solvent-assisted routes improve polymer-catalyst contact. The solvent handling introduced an addition process variable. The key challenge lies in efficiently activating inert polyethylene chains on metal-free solid acid catalysts while controlling secondary cracking and product diffusion. Zeolites are highly attractive cracking catalysts due to their acid sites and tunable pore structures [37]. They also exhibited high thermal stability [38]. In zeolite-catalyzed PE cracking, Brønsted acid sites (BAS) generate carbonium and carbenium intermediates [39]. These intermediates undergo β-scission, isomerization, hydride transfer, and secondary cracking [40]. Acidity and pore architecture jointly shape activity and selectivity [41], [42], [43]. The massive molten polymer chains require accessible acid sites. Pore topology, crystal size, and diffusion length are also critical [44], [45], [46]. ZSM-5, Y, and Beta zeolite have all been used in polyethylene cracking studies. Previous comparative studies have shown that different zeolites significantly influence LDPE conversion and product distributions [47], [48], [49], [50], [51], [52]. During the LDPE cracking process, the larger pores were beneficial to the formation of heavy products, while smaller pores promoted the formation of light olefins [47]. The cracking activity of Y zeolite in polypropylene cracking was related to the acidity on its outer surface and within its mesopores [48]. The ZSM-5 zeolite, with an interwoven network of 10-membered ring channels and higher BAS density, exhibited higher selectivity for linear C4-C7 hydrocarbons in the catalytic cracking of polyethylene [49]. The nanoplate ZSM-5 zeolites had shorter diffusion paths that facilitate the transfer of primary products from external sites to the micropores, enabling their further cracking in an H2 environment [50]. The nano-sized HZSM-5 zeolites catalyzed the conversion of LDPE at 340 °C, achieving a conversion of 65.3%, with the products consisting primarily of C1-C4 hydrocarbons [51]. In the hydrocracking of LDPE at a hydrogen pressure of 60 bar, the Ni/Beta catalyst tends to produce C5-C12 alkanes in the gasoline range [52]. During the hydrogenation of model PE pyrolysis oil, reducing the acidity of the Ni/Beta catalyst promoted the liquid yield [53]. Therefore, the hierarchical nano-sized Beta zeolite had greater application potential in the conversion of LDPE to a range of gasoline-range and C3 hydrocarbon products. The advantages of Beta zeolite can be strengthened by nanosized hierarchical construction [54]. Short diffusion paths and intercrystalline mesoporosity improve acid-site accessibility [55]. They also help activate molten LDPE and shorten the residence time of reactive intermediates [56]. This structure matters for LDPE cracking. Intact LDPE chains are unlikely to diffuse deeply into micropores. Initial activation should mainly occur at external or pore-mouth acid sites. Subsequently, secondary transformations can take place in accessible microporous and mesoporous domains. The Si/Al atomic ratio influences the potential acid-site density, whereas the Brønsted/Lewis acid balance depends on the nature and coordination of Al species established during synthesis and subsequent treatments [57]. It also regulates the competition between deep cracking to LPG and retention of gasoline-range hydrocarbons [58]. Together, these features make hierarchical nano-Beta zeolites useful for connecting framework acidity, mass transport, and product selectivity. Cen et al. found that polyethylene could be converted into gasoline-range hydrocarbons on MFI/MEL zeolites at 240 °C without an external hydrogen supply [59]. Spectroscopic and isotope-labeling studies confirmed that tricoordinated aluminum sites and BAS in the open framework play distinct roles in the self-hydrogenating reaction pathway. This will provide theoretical guidance for the design of highly efficient catalysts for the catalytic conversion of LDPE. In this work, hierarchical nano-Beta zeolites were fabricated by a fluoride-free vapor-assisted dry-gel conversion method, and their performance in hydrogen-free catalytic LDPE cracking under mild conditions was evaluated. The crystallinity, morphology, porosity, acid-site distribution, Al coordination, product distribution, coke behavior, and recyclability of the catalyst were systematically investigated. The characterization results indicated that the suitable BAS, moderated secondary reactivity, large-pore BEA topology, and hierarchical mass transport was beneficial to the hydrogen-free LDPE catalytic cracking to LPG and gasoline-range hydrocarbon under mild condonation. Organizational access Get full-text access by signing in with your organisation Section snippets Chemicals and materials Sodium hydroxide (NaOH), tetraethylammonium hydroxide aqueous solution (TEAOH, 25%), sodium aluminate (NaAlO2), ammonium nitrate (NH4NO3), fumed silica (SiO2), and dichloromethane (CH2Cl2) were purchased from Aladdin. Sodium hydroxide, TEAOH, sodium aluminate, ammonium nitrate, and fumed silica were used for the synthesis and ion exchange of nano-Beta zeolites, while dichloromethane was used as the extraction solvent for liquid products after catalytic reactions. Low-density polyethylene (LDPE, Structural characterization and microscopic morphology of catalysts Hierarchical nano-Beta zeolites were synthesized by fluoride-free vapor-assisted dry-gel conversion (Fig. 1a) [60]. After aging and drying, the aluminosilicate precursor was crystallized in a confined autoclave at a dry gel/H2O mass ratio of 1:0.2. The water-limited environment promoted local nucleation and suppressed crystal growth, yielding nanosized Beta crystals without fluoride mineralizers or extensive dissolution-recrystallization. The traditional hydrothermal method for synthesizing Conclusions In this study, we have shown that hierarchical nano-Beta zeolites enable the hydrogen-free catalytic conversion of LDPE into LPG and gasoline-range hydrocarbons under mild conditions. Nano-Beta (20) achieved a 98.4% LDPE conversion, with selectivities of 61.8% for LPG and 35.4% for gasoline-range hydrocarbons; together, these two target fractions accounted for 97.2% of the conversion products. The large-pore BEA framework and hierarchical nanostructure shortened diffusion paths and improved CRediT authorship contribution statement Liu Kuanguan: Resources. Ruiyan Zhang: Project administration. Xiaowei Li: Software. Chenlong Huang: Investigation. Jiuzhou Chen: Formal analysis. Suli Liu: Conceptualization. Kangzhou Wang: Writing – review & editing, Methodology, Funding acquisition. Wei Qiang: Writing – original draft, Visualization, Data curation. Jianli Zhang: Validation, Supervision. Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Acknowledgement This research was financially supported by the National Natural Science Foundation of China (22368041, 22608292), the Ningxia University Graduate Student Innovation Project (CXXM2026080), the Ningxia Overseas Returnees Innovation Project, and the Yinchuan Science and Technology Innovation Projects (2026KJRC01). View full text References (66) · Y. Luo et al. Au@MoSx boosted carbon nitride for selective photoreforming of plastic waster: synergistic hydrogen production and value-added chemicals generation Advanced Powder Materials (2026) · A. Purohit et al. Polyethylene biodegradation: A multifaceted approach Biotechnology Advances (2025) · C. Liu et al. A review of analytical techniques and mechanisms for rapid detection of micro/nano plastics: Implications and new insights into current micro/nano plastics pollution Chinese Chemical Letters (2026) · D. Shao et al. Joule heat assisting electrochemical degradation of polyethylene microplastics melted on anode Applied Catalysis B: Environment and Energy (2024) · J.V.F. Duque et al. The influence of the recycling stress history on LDPE waste pyrolysis Polymer Testing (2020) · V.B. Subramani et al. Co-liquefaction of cotton gin trash and low-density polyethylene wastes via supercritical ethanolysis for hydrocarbon-rich oil Energy Conversion and Management (2023) · J. Wang et al. Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking Chemical Engineering Journal (2022) · J. Aguado et al. Catalytic conversion of polyolefins into fuels over zeolite beta Polymer Degradation and Stability (2000) · K. Pyra et al. Pd-modified beta zeolite for modulated hydro-cracking of low-density polyethylene into a paraffinic-rich hydrocarbon fuel Applied Catalysis B: Environmental (2020) · D. Kim et al. Metathesis, molecular redistribution of alkanes, and the chemical upgrading of low-density polyethylene Applied Catalysis B: Environmental (2022) Sustainable developments in polyolefin chemistry: Progress, challenges, and outlook Progress in Polymer Science (2023) Hydrogenolysis Versus Hydrocracking for Polyolefin Upcycling Engineering (2026) Techno-economic analysis and life cycle assessment for the catalytic hydrogenolysis and hydrocracking of polyethylene Joule (2026) Complementary acid site mechanisms in hydrogen-free polyethylene upcycling: elucidating the distinct roles of Brønsted and Lewis sites in Ce-modified zeolites Green Chem (2025) Hydrogen-free catalytic depolymerization of waste polyolefins at mild temperatures Applied Catalysis B: Environmental (2023) Production of C5-C12 olefins by catalytic pyrolysis of low-density polyethylene with MCM-41 in CO2/N2 Science of The Total Environment (2023) 2-Stage thermochemical recycling technologies for plastics-to-fuel route Fuel (2026) Hydrogen-free upcycling of polyethylene waste to methylated aromatics over Ni/ZSM-5 under mild conditions Journal of Hazardous Materials (2025) Noble metal-free tandem catalysis enables efficient upcycling plastic waste into liquid fuel components Chemical Engineering Journal (2024) Catalytic pyrolysis of high-density polyethylene (HDPE) over hierarchical ZSM-5 zeolites produced by microwave-assisted chelation-alkaline treatment Fuel (2024) Synthesis of nanocrystalline cellulose induced hierarchical porous ZSM-5 for catalytic conversion of low-density polyethylene Fuel (2023) Chemical recycling of plastic wastes via homogeneous catalysis: A review Chemical Engineering Journal (2024) Catalytic pyrolysis of plastic waste: A review Process Safety and Environmental Protection (2016) Research progress in metal-zeolite bifunctional systems for upcycling of waste polyolefins Journal of Analytical and Applied Pyrolysis (2026) The role of catalyst acidity and microstructure on light olefin selectivity in polyethylene deconstruction in short contact time pulse Joule-heated reactors Applied Catalysis B: Environment and Energy (2026) Catalytic properties in polyolefin cracking of hierarchical nanocrystalline HZSM-5 samples prepared according to different strategies Journal of Catalysis (2010) Unlocking naphtha from polyolefins using Ni-based hydrocracking catalysts Chemical Engineering Journal (2024) Catalytic upgrading of a model polyethylene pyrolysis oil by hydroconversion over Ni-containing hierarchical Beta zeolites with tailored acidity Applied Catalysis B: Environmental (2024) Engineering porous Beta zeolite-encapsulated nickel catalyst for waste polyolefins upcycling Applied Catalysis B: Environment and Energy (2025) Ni-based catalysts supported on Hbeta zeolite for the hydrocracking of waste polyolefins RSC Adv (2024) Green and rapid synthesis of hierarchical nano-sized pure Si-Beta zeolite supported with Zn and Y for effective synthesis of butadiene from aqueous ethanol Chemical Engineering Journal (2024) Catalytic activity of Brønsted acid sites in zeolites: Intrinsic activity, rate-limiting step, and influence of the local structure of the acid sites Journal of Catalysis (2006) Selective recovery of light olefins from polyolefin catalyzed by Lewis acidic Sn-Beta zeolites without Brønsted acidity Catal. Sci. Technol. (2024) Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S0926860X26005582?via%3Dihub
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
P204 · P204-2