研究院科研情报与新闻主站科研动态 · 行业情报 · 管理政策
2026年11月17日
首页 › 碳纤维 › 正文

Magnetic field-assisted selective laser sintering of nickel-coated carbon fiber/PEEK composites for controlled fiber ori

ScienceDirect.com 2026-11-12 5 天前
Collectively, the SLS of fiber reinforced polymer composites has become a viable technology for practical engineering applications. Preferential fiber orientation and the resulting anisotropy have received sustained attention in the development of SLS for fiber reinforced polymer composites. Jansson et al. [19] are among the first to provide a detailed characterization of the mechanical anisotrop
Skip to main contentSkip to article Published by: Elsevier Published by Highlights · •Magnetic field-assisted SLS enhances fiber alignment in NCF/PEEK composites. · •Magnetic assistance improves tensile strength for SLSed NCF/PEEK composites. · •Coupled FEM-DEM simulations reveal magnetic torque-driven fiber reorientation. Abstract The growing demand for lightweight components in space applications has stimulated increasing interest in selective laser sintering (SLS) of fiber reinforced polyetheretherketone (PEEK) composites. For space structures subjected to direction-dependent loading, enhancing fiber alignment along targeted load paths is essential for improving mechanical performance and structural efficiency while minimizing mass. However, the fiber orientation distribution in conventional SLS is largely constrained by the layer thickness, restricting the tunability of fiber alignment. To overcome this limitation, a magnetic field-assisted SLS strategy is proposed to actively regulate the alignment of nickel-coated carbon fibers (NCF) in PEEK composites during the powder spreading process. Two types of NCF are employed to assess the effectiveness of magnetic field regulation. Experimental results demonstrate that the external magnetic field enhances fiber alignment along the spreading direction for both NCF types, accompanied by measurable improvements in strength. To gain insight into the underlying mechanisms, a coupled finite element method and discrete element method (FEM-DEM) framework is developed to assess the role of the magnetic field in governing the dynamic powder spreading behavior. Simulation results reveal that magnetic torque drives fibers to reorient toward the magnetic field lines, with increasing remanent flux density progressively enhancing fiber alignment while exerting minimal influence on powder bed packing density. Overall, this work establishes magnetic field-assisted SLS as a promising approach for tailoring fiber orientation and directional mechanical properties in additively manufactured polymer composites, offering potential for lightweight space structures. Graphical abstract Keywords Fiber reinforced polyetheretherketone (PEEK) composites ; Selective laser sintering ; Magnetic field assistance ; Fiber orientation Introduction Spacecraft components are designed under stringent mass constraints and demanding thermal and mechanical service conditions, creating a need for structural materials that deliver high performance at low weight. Polyetheretherketone (PEEK) is an attractive thermoplastic matrix owing to its excellent thermal stability and mechanical properties, while carbon fiber reinforcement further improves its stiffness and load-bearing capacity. Additive manufacturing (AM), particularly selective laser sintering (SLS) [1], [2], [3], [4], offers considerable design flexibility for fabricating complex fiber-reinforced PEEK components. During the powder spreading process, fibers naturally develop a preferred orientation parallel to the spreading direction [5]. Such preferential alignment improves the utilization of fiber reinforcement and enhances directional mechanical performance. However, the degree of fiber alignment is predominantly governed by the layer thickness, limiting independent control over the resulting orientation distribution. Therefore, introducing additional means of regulating fiber alignment during powder spreading is important for further exploiting the mechanical potential of SLSed fiber reinforced PEEK composites. The field of SLS for fiber reinforced polymer composites has undergone rapid expansion and technological breakthroughs in recent years. Yan et al. [6] and Jing et al. [7] have extensively investigated the preparation of carbon fiber reinforced polyamide 12 (CF/PA12) composites through innovative powder coating methods and targeted fiber surface treatments, focusing on enhancing interfacial adhesion while mitigating process induced defects including poor dispersion and high porosity. Wang et al. [8] have introduced a thermally induced precipitation process to fabricate multiscale fiber reinforced powders, where carbon fibers are encapsulated by a PA12 matrix and further shielded by a carbon nanotube film, achieving a higher fiber content while maintaining preferable flowability for SLS applications. Driven by the demand for structural reliability under the harsh thermal gradients of space, polyetheretherketone (PEEK) has emerged as a premier matrix material for SLS process [9], [10], [11]. Yan et al. [12], [13] have elucidated the sintering kinetics and powder reusability in the SLS of CF/PEEK composites, and further developed targeted post-processing strategies to mitigate mechanical anisotropy and enhance interlayer bonding [14]. Our prior works [15], [16], [17] have advanced the SLS process of CF/PEEK composites through optimized parameters and nano-SiO₂ flow agents under multiple scanning strategies. Recently, Wang et al. [18] have revealed the influence of glass fiber length and content on the SLS process of glass fiber reinforced PEEK (GF/PEEK) composites, achieving a superior balance between load-bearing capacity and electromagnetic transparency. Collectively, the SLS of fiber reinforced polymer composites has become a viable technology for practical engineering applications. Preferential fiber orientation and the resulting anisotropy have received sustained attention in the development of SLS for fiber reinforced polymer composites. Jansson et al. [19] are among the first to provide a detailed characterization of the mechanical anisotropy in SLSed CF/PA12 composites, uncovering that fiber alignment along the powder spreading direction influences the observed anisotropic behavior. Badini et al. [20] have elucidated the mechanism of mechanical anisotropy in SLSed CF/PA12 and CF/PA11 composites by demonstrating the movement of recoater induces a preferred fiber orientation. Khudiakova et al. [21] have utilized high-resolution X-ray computed tomography (XCT) to establish a detailed fiber orientation profile in SLSed CF/PA1212 composites, demonstrating that most fibers are oriented within the plane of the powder layer, predominantly along the spreading direction. However, the preferential fiber orientation is primarily influenced by the layer thickness and is relatively insensitive to other process parameters [22]. To achieve breakthrough regulation of fiber orientation distribution, external field assistance, including ultrasonic, magnetic, and microwave fields, offers a potential approach that provides additive manufacturing with additional process control capabilities [23], [24], [25], [26]. Li et al. [27], [28] have introduced a uniform magnetic field during the preparation of steel fiber reinforced mortar powders and demonstrated that aligning the magnetic field with the flow direction improves the fluidity of the steel fiber mortar. To date, however, the integration of magnetic field assistance into the SLS powder spreading process for in-situ fiber orientation control remains largely unexplored. To better understand the formation mechanism underlying the SLS process of fiber reinforced polymer composites, the numerical simulation based on the discrete element method (DEM) has been developed. Haeri et al. [29], [30] have employed DEM simulations to investigate the powder spreading process, revealing the effects of particle shape, spreader type, and operating conditions on bed quality. Chen et al. [31], [32] have integrated XCT with DEM to elucidate the formation mechanism of fiber orientation in SLS, revealing that a shearing flow with a vertical velocity gradient induces torques that force short fibers to rotate and align along the spreading direction. Tan et al. [33], [34], [35] have developed a multi-physics framework to evaluate the effects of layer thickness, roller velocity, and fiber content on the packing quality. In our recent works [22], [36], we have established a sequentially coupled high-fidelity multi-layer DEM model and computational fluid dynamics (DEM-CFD) framework for fiber reinforced PEEK composites, enabling the evaluation of powder spreading quality, fiber content limits, and the underlying pore formation mechanisms during sintering. Currently, the DEM-based numerical simulation for the magnetic field-assisted SLS process of fiber reinforced polymer composites remains rarely reported. In this work, a magnetic field-assisted SLS strategy is developed to enhance the fiber alignment along the powder spreading direction in PEEK-based composites. Two types of nickel-coated carbon fibers (NCF) are employed to evaluate the effectiveness of magnetic field regulation. Experimental investigations are conducted to characterize the fiber orientation distribution and mechanical properties of the fabricated composites, thereby assessing the influence of magnetic field assistance on fiber alignment and mechanical reinforcement. To elucidate the underlying mechanisms, a coupled finite element method-discrete element method (FEM-DEM) framework is established to resolve the magnetic field distribution and simulate the dynamic powder spreading process. Particular attention is devoted to the magnetic torque-induced fiber reorientation and the effects of remanent flux density on fiber alignment and powder bed packing quality. This combined experimental and numerical investigation provides insights into the magnetic regulation of fiber orientation during powder spreading. Organizational access Get full-text access by signing in with your organisation Section snippets Powder preparation The mixed powders employed in the magnetic field-assisted printing are composed of NCF, PEEK, and trace amounts of nano-SiO₂. The PEEK material is Victrex 450PF with a mean diameter of 64 μm. To evaluate the effectiveness of the magnetic field in regulating the fiber orientation distribution, two types of commercial nickel-coated carbon fibers are introduced. The two fiber types are selected to confirm the broad applicability of magnetic regulation. Specifically, Type A is a carbon fiber Magnetic field-enhanced fiber alignment in SLSed NCF/PEEK composites To evaluate the effect of the magnetic field on fiber orientation evolution during powder spreading, the microstructures of SLSed NCF/PEEK composites are characterized separately for two material systems including 20 wt% Type A NCF and 30 wt% Type B NCF, each processed without and with magnetic field assistance. Fig. 7(a)-(b) show the typical cross-sections of SLSed NCF/PEEK composites with 20 wt% Type A NCF and fiber distribution within the materials. Both specimens exhibit good overall Discussion The magnetic field-assisted SLS strategy developed in this study provides a promising approach for tailoring fiber orientation in NCF/PEEK composites, yet its practical efficacy is inherently constrained by the characteristics of the magnetic field generation system. In the current setup, permanent magnets with a fixed remanent flux density of 0.8 T are employed, which means that any variation in field strength requires physical replacement of the magnets, a procedure that is both cumbersome CRediT authorship contribution statement Haibin Tang: Writing – original draft, Project administration, Methodology, Funding acquisition, Conceptualization, Writing – review & editing. Tianxiao Wang: Writing – original draft, Methodology, Data curation, Conceptualization, Writing – review & editing. Kai Yang: Investigation, Data curation. Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Acknowledgement This work is supported by the National Natural Science Foundation of China under Grant Number 52675462 and 52305382, the Basic Research Program of Jiangsu under Grant Number BK20252038, as well as the Fundamental Research Funds for the Central Universities under Grant Number 30924010834. View full text References (44) · X. Du et al. 3D printing of heat-resistant thermosetting polyimide composite with high dimensional accuracy and mechanical property Compos. Part B Eng. (2025) · G. Flodberg et al. Pore analysis and mechanical performance of selective laser sintered objects Addit. Manuf. (2018) · H. Tang et al. Laser powder bed fusion of carbon-reinforced PEEK composites: processability, mechanical performance, and microwave absorption Compos. A: Appl. Sci. Manuf. (2027) · H. Tang et al. Experimental and computational analysis of structure-property relationship in carbon fiber reinforced polymer composites fabricated by selective laser sintering Compos. Part B Eng. (2021) · C. Yan et al. Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering Compos. Sci. Technol. (2011) · W. Jing et al. Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder Mater. Des. (2017) · Z. Wang et al. Development and evaluation of multiscale fiber-reinforced composite powders for powder-bed fusion process Chin. J. Mech. Eng.: Addit. Manuf. Front. (2023) · P. Chen et al. Mechanical properties and microstructure characteristics of lattice-surfaced PEEK cage fabricated by high-temperature laser powder bed fusion J. Mater. Sci. Technol. (2022) · H. Wang et al. Comparative evaluation of printability and compression properties of poly-ether-ether-ketone triply periodic minimal surface scaffolds fabricated by laser powder bed fusion Addit. Manuf. (2022) · P. Chen et al. Aging mechanism of polyetheretherketone powder during layer-wise infrared radiation of high-temperature laser powder bed fusion Mater. Des. (2022) High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering Compos. Sci. Technol. (2018) Processability and reusability of CF/PEEK mixture for powder bed fusion of high strength composites Compos. Commun. (2022) Effect of fabrication process on the microstructure and mechanical performance of carbon fiber reinforced PEEK composites via selective laser sintering Compos. Sci. Technol. (2024) Laser powder bed fusion of high-performance carbon fiber reinforced PEEK composites: process design and orthotropic behavior analysis Compos. A: Appl. Sci. Manuf. (2025) Mechanical and fatigue characterization of LPBF-fabricated PEEK-based composites at elevated temperatures: experiment and GCN-based prediction Int. J. Fatigue (2026) Enhancing processability and performance of laser powder bed fusion-fabricated poly-ether-ether-ketone composites: influence of glass fiber length and content Addit. Manuf. (2026) Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering Addit. Manuf. (2016) Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering Addit. Manuf. (2020) 3D printing of high-stiffness and high-strength glass fiber reinforced PEEK composites by selective laser sintering Compos. A: Appl. Sci. Manuf. (2024) Influence of static magnetic field on microstructure and mechanical behavior of selective laser melted AlSi10Mg alloy Mater. Des. (2019) Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion Int. J. Mach. Tools Manuf. (2022) Fluidity and mechanical properties of magnetic-field-enhanced steel fibre reinforced coral mortar Powder Technol. (2025) Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S0032591026013665
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
P204 · P204-2