研究院科研情报与新闻主站科研动态 · 行业情报 · 管理政策
2026年11月17日
首页 › 碳纤维 › 正文

Dipolar Resonance-Mediated Geometry Engineering of Carbon Fibers for Electromagnetic Wave Attenuation and Mechano-Stimul

ScienceDirect.com 2026-11-11 6 天前
Within the porous matrix, the conductive network constructed from these CFs achieves favorable impedance matching for broadband EM wave attenuation and provides the conductive pathways needed for reversible piezoresistive responses, enabling superior mechano-stimuli perception. The as-fabricated composite achieves an effective absorption bandwidth of 5.8 GHz at a thickness of 1.67 mm, and metastru
Skip to main contentSkip to article Published by: Elsevier Published by Highlights · •Length-optimized CF network reconciles EM wave absorption and mechano-stimuli perception. · •Metastructure absorber achieves 15.75 GHz EAB across 2–18 GHz. · •The porous CF/PDMS sensor reaches a sensitivity of 8.21 kPa-1 and stable performance over 600 cycles. Abstract For smart unmanned aerial vehicle (UAV) skins and embodied-intelligence electronic skins, the development of composite materials integrating electromagnetic (EM) wave attenuation and mechano-stimuli perception is highly desirable. In this work, a dipole-resonance-mediated geometry engineering strategy is proposed for carbon fiber (CF) composites. Polydimethylsiloxane (PDMS) serves as the continuous matrix, with length-optimized CFs as the functional filler, enabling the construction of porous CF/PDMS composites via a sacrificial-template strategy. Within the porous matrix, the conductive network constructed from these CFs achieves favorable impedance matching for broadband EM wave attenuation and provides the conductive pathways needed for reversible piezoresistive responses, enabling superior mechano-stimuli perception. The as-fabricated composite achieves an effective absorption bandwidth of 5.8 GHz at a thickness of 1.67 mm, and metastructure optimization further broadens this bandwidth to 15.75 GHz at a thickness of 16 mm. Moreover, the resulting sensor exhibits highly sensitive and reversible resistance responses to static pressure, bending, and transient impact loading, delivering a high sensitivity of 8.21 kPa-1 and maintaining excellent long-term cycling stability over 600 consecutive loading–unloading cycles. This work offers design guidelines for developing multifunctional integrated materials toward smart UAV skins and embodied-intelligence electronic skins. Graphical abstract Keywords Electromagnetic wave absorption ; Impedance matching ; Permittivity ; Carbon fiber ; Porous structure Introduction The rapid advancement of modern detection and intelligent systems imposes substantial demands on multifunctional electromagnetic (EM) materials[1], [2], [3] for smart unmanned aerial vehicles (UAV) skins and electronic skins toward embodied intelligence[4], [5], [6]. As a promising technical route, composites integrating EM wave attenuation and mechano-stimuli perception have become a prominent research frontier[7], [8]. However, it remains difficult to achieve superior EM wave attenuation alongside stable, repeatable mechano-stimuli perception within a single material system. A fundamental dilemma lies in the conflicting demands on the connectivity of the conductive network: EM wave attenuation relies on localized networks to achieve optimal impedance matching[9], [10], [11], [12], whereas mechano-stimuli perception demands continuous networks capable of reversible reconfiguration under deformation[13], [14], [15]. However, constructing such continuous networks inevitably compromises impedance matching, posing a significant challenge to their synergistic integration. Therefore, developing composite materials that simultaneously realize broadband EM wave attenuation and stable mechano-stimuli perception represents a critical challenge for real-world applications. Carbon fibers (CFs), featuring high electrical conductivity, high elastic modulus, low density and superior mechanical properties, stand out as appealing candidate fillers for stealth materials[16], [17], [18], [19]. Owing to their inherent high electrical conductivity, carbon fibers are capable of constructing local conductive networks within polymer matrices, giving rise to effective dielectric loss for EM wave attenuation. CF length constitutes one of the key factors dictating the geometric dimension of these local conductive network units. When the characteristic dimension of such network units matches the intrinsic resonant scale of incident EM waves, pronounced dipole resonance can be triggered to intensify EM energy dissipation[20], [21]. As such, fiber-length modulation offers a viable avenue to tailor the dielectric response and EM wave absorption performance of composites. Nevertheless, improper fiber-length conditions tend to induce highly connected conductive networks or insufficient percolation behavior[22], thereby hindering the realization of broadband EM wave attenuation capability. Meanwhile, these same interconnected conductive networks underpin mechano-stimuli perception functionality, wherein sensing signals stem from the reversible reconfiguration of conductive pathways upon external mechanical deformation. Consequently, for CF-based composites, both EM wave attenuation and mechano-stimuli perception are governed by the same conductive network, yet they impose conflicting connectivity requirements on it[5], [23], [24]. This makes it necessary to engineer the composite microstructure to reconcile this inherent trade-off. This work proposes a dipole-resonance-mediated geometric engineering strategy, in which the local conductive network units constructed by CFs possess dimensions matching the intrinsic resonant scale of incident EM waves to enable dipole resonance, offering instructive guidance for the dimensional design of carbon-fiber fillers. Guided by this principle, porous CF/polydimethylsiloxane (PDMS) composites are fabricated via a sacrificial-template approach using CFs with optimized lengths. The abundant air pores introduced by the porous architecture can modulate the equivalent permittivity of composites, alleviating excessive dielectric loss and impedance mismatch originating from continuous conductive networks formed by optimized-length carbon fibers and thus optimizing impedance matching. Meanwhile, internal pores reserve sufficient space for matrix deformation and enable reversible reconfiguration of conductive networks under external mechanical stimuli while retaining the highly-connected conductive network required for sensing. This design overcomes the inherent trade-off, enabling the coexistence of high-conductivity networks for sensing and broadband EM wave absorption. The as-prepared composite delivers an effective absorption bandwidth of 5.8 GHz at a thickness of 1.67 mm, and metastructure optimization further broadens this bandwidth to 15.75 GHz at a total thickness of 16 mm. Moreover, the resulting sensor achieves a high sensitivity of 8.21 kPa-1 and maintains highly stable resistance signals over 600 loading–unloading cycles, demonstrating excellent sensing sensitivity and long-term cycling reliability. This multifunctional composite provides new design insights into the development of integrated devices combining EM wave attenuation and mechano-stimuli perception. Organizational access Get full-text access by signing in with your organisation Section snippets Preparation of CF/PDMS composites First, short-chopped CFs with four distinct lengths (40 μm, 150 μm, 0.5 mm, and 1 mm) were sequentially ultrasonicated in acetone, ethanol, and deionized water for 1 h in each solvent to remove surface sizing and impurities. Subsequently, these four fiber samples were subjected to ultrasonication in concentrated nitric acid for 2 h. Following acid ultrasonication, the fibers were rinsed with deionized water until the filtrate reached neutral pH, and then dried in a vacuum oven at 60 °C. The Fabrication of CF/PDMS composites and characterizations of CFs CF/PDMS composites were fabricated through a solution-blending and thermal-curing strategy, as schematically illustrated in Fig. 1a. Pre-cleaned CFs of different lengths were subjected to acid modification, which introduced abundant oxygen-containing functional groups onto the fiber surfaces. After rinsing to neutral pH, the modified CFs were blended with a two-part platinum-catalyzed PDMS elastomer (Sylgard 184, Dow Corning). The oxygen-containing groups on the fiber surfaces improve wetting Conclusion In summary, a dipole-resonance-mediated geometry engineering strategy was proposed to determine the optimal length of CFs. The CF network induces pronounced dipole resonance, enabling broadband EM wave absorption. However, mechano-stimuli perception relies on a highly connected conductive network capable of reversible reconfiguration. In dense matrices, constructing such a network typically requires high filler loadings, which can cause impedance mismatch and restrict structural deformability. CRediT authorship contribution statement Gang Sui: Writing – review & editing, Supervision, Methodology. Zhi-Ling Hou: Writing – review & editing, Supervision, Project administration, Conceptualization. Xuesong Gao: Writing – original draft, Investigation, Conceptualization. Junying Zhang: Writing – review & editing, Validation, Project administration. Song Bi: Writing – review & editing, Validation Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Acknowledgments This work was supported by the National Natural Science Foundation of China (Nos. 22675007 and 12674207). View full text References (57) Ultralight hierarchical skin–core CoSe@C/carbon nanofiber aerogel fibers for broadband microwave absorption Carbon (2026) Realizing high-performance wood-based piezoresistive sensing through an interfacial bridging approach for wearable functional integration J. Colloid Interface Sci. (2026) Synergistic thermal management and electromagnetic wave absorption in core-sheath phase change composites Adv. Funct. Mater. (2026) Mechanically robust and thermal insulating nanofiber elastomer for hydrophobic, corrosion-resistant, and flexible multifunctional electromagnetic wave absorbers Adv. Funct. Mater. (2025) Advancements in microwave absorption motivated by interdisciplinary research Adv. Mater. (2024) Multifunctional MXene/MOF-derived foam for adaptive radar-infrared stealth and structural sensing Adv. Funct. Mater. (2026) Reduced-reflectance bionic E-skin with electromagnetic–environmental–sensing integration enabled by ni-reconstructed liquid metal networks Adv. Funct. Mater. (2026) Adaptive ionic liquid polymer microwave modulation surface with reprogrammable dielectric properties Nat. Commun. (2026) A pomegranate-like nanolayer featuring a core-shell architectural design for thermal-mechanical-electromagnetic responses and sensor Adv. Funct. Mater. (2025) Mechanism decoupling of impedance matching and attenuation enhancement via spatial distribution of loading components Adv. Funct. Mater. (2026) Multispectrum electromagnetic response in FeNiHo/C heterodimensional structure for microwave absorption and multimode photodetection Adv. Mater. (2025) Ultrahigh permittivity of surface-state-dominated Bi2Te3 nanosheets for low-frequency microwave absorption Research (2025) Multi-scale synergistic regulation strategy to develop mesoporous carbon hollow nanospheres/bean-shaped nanofibers for corrosion-resistant, flexible, and lightweight microwave absorbers Research (2026) A review on the usage of continuous carbon fibers for piezoresistive self strain sensing fiber reinforced plastics J. Compos. Sci. (2021) Construction of ZnS/ZnIn2S4/CF via defect and interface engineering for efficient electromagnetic wave absorption Adv. Funct. Mater. (2026) Ultralight broadband electromagnetic wave absorption enabled by interface-engineered two-layered periodic carbon fiber fabrics Adv. Funct. Mater. (2026) The excellent electromagnetic wave absorbing properties of carbon fiber composites: the effect of metal content Inorg. Chem. Front. (2022) Ultralong SiC nanowires for electromagnetic wave absorption ACS Appl. Nano Mater. (2025) Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S000862232601095X
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
P204 · P204-2