Hardness-toughness synergy in alumina with core-shell CF@HEC architectures
Herein, inspired by the brick-and-mortar structure of natural nacre, a biomimetic CF@HEC core-shell reinforcement featuring an integrated "hard HEC shell-tough CF core" architecture was constructed for the first time via in-situ growth of the high-entropy carbide (HEC) shell on CF surfaces. This design established a continuous stress transfer pathway from the ceramic matrix through the HEC shell t
Skip to main contentSkip to article
Published by: Elsevier
Published by
Abstract
The intrinsic brittleness severely limits service reliability of structural ceramics. Herein, inspired by the brick-and-mortar structure of natural nacre, a biomimetic CF@HEC core-shell reinforcement featuring an integrated "hard HEC shell-tough CF core" architecture was constructed for the first time via in-situ growth of the high-entropy carbide (HEC) shell on CF surfaces. This design established a continuous stress transfer pathway from the ceramic matrix through the HEC shell to the CF core, enabled by in-situ bonding at the CF/HEC interface and intimate bonding with the Al2O3 matrix. The Al2O3-CF@HEC composite achieved synergistic improvements in hardness and fracture toughness over the physically mixed counterpart with identical composition and processing. This superior performance arises from the synergistic contributions of the core-shell architecture and the multi-pathway energy dissipation enabled by the CF@HEC structure. The strategy combining a sacrificial interlayer with in-situ reaction offers a new paradigm for interfacial design and the simultaneous hardening and toughening of high-performance ceramic matrix composites.
Graphical abstract
A bioinspired CF@HEC core-shell reinforcement, constructed by in-situ growing a high-entropy carbide shell on carbon fibers, establishes strong interfacial bonding and multi-pathway crack dissipation within the Al2O3 ceramic matrix, thereby enabling synergistic hardness-toughness enhancement.
Keywords
Bioinspired ceramics
;
Core-shell structure
;
High-entropy carbides
;
Carbon fibers
;
Mechanical properties
Introduction
Al2O3 ceramics, owing to their high hardness, favorable chemical stability, and exceptional high-temperature oxidation resistance, occupy an irreplaceable position in critical engineering fields such as aerospace, mechanical manufacturing, and national defense equipment [1], [2], [3]. However, their intrinsic brittleness and extremely low fracture toughness severely limit their service reliability and lifespan under complex stress states or thermal shock conditions. To overcome this bottleneck, various toughening strategies have been developed, including particle-dispersion toughening [4], [5], whisker/fiber toughening [6], [7], [8] and phase-transformation toughening [9], [10], [11]. Among these, carbon fiber (CF), by virtue of its high tensile strength, high modulus, and exceptional fracture energy absorption capacity, is commonly used as a reinforcing material [12], [13] and has garnered extensive attention as a fibrous toughening phase in ceramic matrix composites [14], [15], [16], [17], [18]. The toughening effect primarily originates from mechanisms such as fiber pull-out, crack bridging, and crack deflection, which effectively dissipate strain energy during crack propagation, thereby enhancing the fracture resistance of the material.
However, the application of carbon fibers in material matrices faces a long-standing bottleneck that has yet to be effectively resolved. The inherently smooth surface and chemical inertness of carbon fibers result in a lack of active sites for effective bonding with the matrix, leading to weak interfacial bonding strength between the fibers and the matrix [19], [20], [21]. Under loading, such weak interfaces impede the efficient transfer of stress from the matrix to the fibrous reinforcements, causing premature fiber debonding and pull-out, thereby failing to fully exploit their toughening potential. Furthermore, owing to the intrinsically low hardness of carbon fibers, their incorporation inevitably leads to a reduction in the overall hardness of the ceramic composite, despite the concurrent improvement in toughness [22], [23].
High-entropy carbides (HECs) are a class of emerging multi-principal-element ceramic materials that have gained considerable attention in recent years. Their pronounced lattice distortion effect significantly elevates the resistance to dislocation motion, thereby endowing the material with excellent hardness performance [24], [25], [26]. Additionally, HECs also exhibit exceptional properties including high melting point, favorable oxidation resistance, and outstanding thermal stability [27], [28], [29]. Nevertheless, current research on HEC remains largely confined to bulk intrinsic properties [30] and HEC-based composites [31], [32], [33], with insufficient exploration of their potential as reinforcing phases. Even when employed as reinforcements, their primary contribution lies in hardness enhancement, whereas their toughening capability remains relatively inadequate. To concurrently achieve hardening and toughening, a conventional strategy involves physically mixing HEC particles with secondary toughening phases such as carbon fibers and then introducing them into the matrix. However, this approach fails to address the core issue. The weak physical interfacial bonding between CF and the matrix persists, and there is no structurally effective connection between HEC particles and fibers. The functions of the two components remain isolated from each other, rendering synergistic effects unattainable, and the improvements in hardness and toughness are still constrained by their respective inherent limitations. Therefore, how to effectively integrate HEC reinforcements with carbon fibers toughening phases, leveraging their high hardness to compensate for the deficiency of fibers while simultaneously exploiting their interfacial modulation capability, remains an unexplored avenue.
Based on this, inspired by the brick-and-mortar structure of nacre in nature and its synergistic rigid-flexible mechanical mechanism, a biomimetic core-shell reinforcement, denoted as CF@HEC, featuring an integrated "hard HEC shell-tough CF core" architecture, was proposed to be constructed via in-situ growth of (HfNbTaTiZr)C HEC shells on the surface of carbon fibers. This configuration established a continuous stress transfer pathway from the HEC shell and further to the CF core, thereby improving the interfacial bonding between the fibers and the matrix. In terms of mechanical performance, the HEC shell, leveraging its intrinsically high hardness, served as the brick to resist crack initiation, while the CF core functioned as the toughening component of the mortar through fiber pull-out. The two components operate synergistically via in-situ synthesis, effectively circumventing the drawbacks of conventional composites where hardening and toughening phases are added separately, leading to mutually exclusive functions. In this study, Al2O3-CF@HEC composite was fabricated by spark plasma sintering (SPS). The effects of CF@HEC on interfacial structure and mechanical properties were systematically investigated, with a focus on unraveling its regulatory mechanisms on toughening behaviors such as crack deflection, crack bifurcation, and fiber pull-out. Ultimately, the intrinsic nature of the synergistic hardening-toughening effect imparted by the "hard shell-tough core" architecture was elucidated.
Organizational access
Get full-text access by signing in with your organisation
Section snippets
Raw Materials
The raw materials used in this experiment included short-cut carbon fibers (density 1.8 g cm−3), Hf, Nb, Ti, Ta, and Zr powders (particle size: 1–3 μm, purity: 99.9%), along with α-Al2O3 powder (particle size: 0.5–2 μm, purity: 99.9%). In addition, the reagents employed during the preparation process included absolute alcohol, acetone, concentrated nitric acid, FeCl3·6H2O, glucose monohydrate, NaCl, and KCl.
Synthesis of CF@HEC
The synthesis procedure of the CF@HEC core-shell structure is illustrated in Fig. 1,
Surface Morphology and Composition of CF@HEC
The surface morphologies of the untreated CF, CF@PyC, and CF@HEC powder samples were characterized by SEM, as shown in Fig. 3. The untreated carbon fibers exhibited a typical smooth surface with only a few shallow longitudinal grooves (Fig. 3a, b) [34]. Such a smooth and chemically inert surface is unfavorable for establishing strong interfacial bonding with the ceramic matrix. After hydrothermal carbonization and subsequent heat treatment, a uniform PyC coating was deposited on the carbon
Conclusions
In summary, this study successfully constructed a biomimetic CF@HEC core-shell reinforcement featuring an integrated "hard HEC shell-tough CF core" architecture by in-situ growth of HEC shell on carbon fiber surfaces, and subsequently introduced it into an Al2O3 matrix to fabricate Al2O3-CF@HEC composite. The composite achieved synergistic improvements in both hardness and toughness compared to the AHF sample prepared by direct dispersion mixing. This superior performance originates from the
CRediT authorship contribution statement
Zhen Cao: Writing – review & editing. Jun Zhao: Writing – review & editing. Xiao Li: Writing – review & editing. Huichuan Yu: Writing – review & editing. Yingqi Zheng: Writing – original draft, Investigation, Formal analysis. Jialin Sun: Writing – review & editing, Supervision, Funding acquisition, Conceptualization
Declaration of Competing Interest
☒ The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Acknowledgements
This work is supported by the National Natural Science Foundation of China (52675583, 52375451, 52005396), Shandong Provincial Natural Science Foundation (ZR2023YQ052), Open project of State Key Laboratory of Solid Lubrication (LSL-22-11), Xiaomi and Qilu Youth Scholar Project Funding of Shandong University. This work is supported by Physical-Chemical Materials Analytical & Testing Center of School of Space Science and Technology.
View full text
References (50)
· Y.L. Dong et al.
Mater. Sci. Eng. A.
(2009)
· B. Zhao et al.
Ceram. Int.
(2017)
· Z. Yang et al.
Mater. Charact.
(2025)
· B. Liu et al.
Mater. Sci. Eng. A.
(2007)
· Z. Wang et al.
Ceram. Int.
(2020)
· W. Du et al.
Ceram Int
(2020)
· C. Wang et al.
Adv. Fiber Mater.
(2024)
· L. Yang et al.
Carbon
(2023)
· T. Shen et al.
J. Mater. Sci. Technol.
(2026)
· F. Cai et al.
J. Eur. Ceram. Soc.
(2021)
Ceram. Int.
(2018)
Ceram. Int.
(2013)
Ceram. Int.
(2025)
Prog. Mater. Sci.
(2024)
Compos. Pt. B-Eng.
(2022)
A-Appl. Sci. Manuf.
(2019)
Ceram. Int.
(2020)
Mater. Sci. Eng. R-Rep.
(2021)
Acta Mater
(2026)
Acta Mater
(2025)
Compos. Pt. B-Eng.
(2022)
Carbon
(2011)
Ceram. Int.
(2019)
Ceram. Int.
(2018)
J. Eur. Ceram. Soc.
(2017)
Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S1000681826002481?via%3Dihub
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。