研究院科研情报与新闻主站科研动态 · 行业情报 · 管理政策
2026年11月17日
首页 › 碳纤维 › 正文

Dual dianhydride-regulated waterborne poly(amic acid) salt sizing agents for enhanced interfacial performance of CF/PPS

ScienceDirect.com 2026-11-14 3 天前
· •Dual-dianhydride molecular design: A waterborne PAAS sizing agent was developed by regulating rigid and flexible dianhydride units. · •Interfacial dual enhancement strategy: EAO treatment and PAAS sizing improved the ILSS of CF/PPS composites by 17.5 %. · •Continuous carbon fiber processing: An integrated continuous processing system combining EAO treatment and PAAS sizing was established under
Skip to main contentSkip to article Published by: Elsevier Published by Highlights · •Dual-dianhydride molecular design: A waterborne PAAS sizing agent was developed by regulating rigid and flexible dianhydride units. · •Interfacial dual enhancement strategy: EAO treatment and PAAS sizing improved the ILSS of CF/PPS composites by 17.5 %. · •Continuous carbon fiber processing: An integrated continuous processing system combining EAO treatment and PAAS sizing was established under laboratory conditions. Abstract Waterborne polyimide sizing agents offer environmental and thermal advantages for carbon fiber reinforced thermoplastic composites, yet balancing dispersion stability and high-temperature performance remains challenging. Novel waterborne poly(amic acid) salt (PAAS) sizing agents were developed through a dual dianhydride regulation strategy by varying dianhydride ratios for CF/PPS composites. A continuous surface modification route integrating electrochemical anodic oxidation and PAAS sizing was established. Dianhydride composition significantly influences the molecular structure, dispersion stability, and thermal properties of PAAS. The selected PAAS formulation prepared at a monomer molar ratio of 2:1:1 exhibits an average particle size of 158.0 nm and a T5 % of 498.47 ℃. Among the concentrations investigated, PAAS at 1.5 wt% forms a uniform interphase layer, increasing carbon fiber surface energy to 53.92 mN/m and improving the single fiber tensile strength and interlaminar shear strength of CF/PPS composites by 6.6 % and 17.5 %. This work presents a dual dianhydride regulation strategy for developing waterborne polyimide-based sizing agents suitable for high temperature thermoplastic composites. It provides a promising approach for continuous carbon fiber surface modification and future process development. Graphical abstract Keywords CF/PPS composites ; Interfacial adhesion ; Aqueous polyimide ; High-temperature resistance Introduction Carbon fiber reinforced thermoplastic composites (CFRTPs) have attracted increasing attention in the aerospace and automotive industries because of their excellent toughness, rapid processing capability, and recyclability[1], [2]. Among various thermoplastic matrices, polyphenylene sulfide (PPS) is particularly attractive owing to its outstanding thermal stability, chemical resistance, and inherent flame retardancy [3]. Carbon fiber reinforced polyphenylene sulfide (CF/PPS) composites combine the high specific strength and stiffness of carbon fibers with the excellent thermal and chemical stability of the PPS matrix. As a result, CF/PPS composites are promising lightweight structural materials for aerospace, petrochemical, and electrical applications operating in harsh environments [4], [5], [6], [7]. Despite these advantages, the chemically inert and smooth surface of carbon fibers leads to poor wettability and weak interfacial adhesion with the PPS matrix. Consequently, insufficient interfacial bonding remains one of the major factors limiting the mechanical performance of CF/PPS composites [6], [8]. Therefore, effective interfacial modification is essential to enhance fiber–matrix adhesion and further improve the overall mechanical properties of CF/PPS composites. Various interfacial modification strategies, including fiber sizing [9], [10], electrophoretic deposition [11], and in situ surface modification [12], have been developed to improve the interfacial performance of carbon fiber reinforced thermoplastic composites. Among these approaches, fiber sizing remains the most practical and widely adopted method because of its simplicity and cost-effectiveness [13]. However, commercially available sizing agents are predominantly thermosetting resins, whose limited thermal stability and poor compatibility with thermoplastic matrices restrict their application in CF/PPS composites [14]. Therefore, developing thermoplastic sizing agents with excellent thermal stability and compatibility has become increasingly important. Polyimide (PI) has emerged as a promising thermoplastic sizing material due to its outstanding thermal stability, excellent mechanical properties, and compatibility with high-performance thermoplastic matrices [15]. In particular, its precursor, polyamide acid (PAA), can be neutralized to form its water-soluble salt, poly(amic acid) salt (PAAS), for environmentally friendly aqueous sizing, while the abundant carboxyl groups promote strong interactions with the carbon fiber surface [4], [16]. However, highly aromatic PI structures generally provide excellent thermal stability but may compromise chain mobility and interfacial adaptability, making molecular structure regulation essential for achieving desirable interfacial performance [17], [18]. Accordingly, considerable efforts have been devoted to tailoring PAA sizing agents. Ma et al. [19] enhanced the interfacial properties of CF/PEI and CF/PEEK composites by constructing a rigid–flexible gradient interphase, resulting in increases of 68.01 % and 39.40 % in the interlaminar shear strength (ILSS), respectively. Chen et al. [20] further improved the interfacial properties of CF/PEEK composites by regulating the ratio of rigid and flexible diamine monomers. Although diamine engineering has been widely explored to regulate PI chain flexibility, dianhydride units directly determine the rigidity, conformational freedom, and intermolecular interactions of the polymer backbone, which may critically influence aqueous dispersion behavior and interfacial reconstruction of PAAS sizing agents. In this work, a dual dianhydride regulation strategy was proposed to balance backbone rigidity and conformational flexibility of waterborne PAAS sizing agents. The effects of dual dianhydride regulation on the molecular structure, dispersion stability, and thermal stability of PAAS were investigated. Meanwhile, the influence of sizing-solution concentration on the interfacial properties, processability, and mechanical performance of CF/PPS composites was systematically evaluated. Furthermore, a continuous surface modification approach combining electrochemical anodic oxidation and PAAS sizing was demonstrated under the investigated processing conditions. This work provides new insights into the structure regulation of waterborne PAAS sizing agents and offers a promising approach for improving the performance of CF/PPS composites. Organizational access Get full-text access by signing in with your organisation Section snippets Materials Carbon fiber (CF, T700-12 K, unsized) was supplied by Weihai Tuozhan Fiber Co., Ltd. (Weihai, China). Polyphenylene sulfide film (PPS, 0.1 mm thick) was purchased from Dongguan Hangpeng Plastic Co., Ltd. (Dongguan, China). 4,4′-Oxydianiline (ODA, 98.0 %), 3,3′,4,4′-Oxydiphthalic dianhydride (ODPA, 99.0 %), pyromellitic dianhydride (PMDA, 99.0 %), and triethylamine (TEA, 99.5 %) were purchased from Aladdin Industrial Corporation. (Shanghai, China). Dimethylacetamide (DMAc, 99.0 %) and ammonium Structure and properties of PAAS sizing agent The FTIR spectra of PAA, PAAS, and their corresponding polyimide products, polyimide (PI) and PAAS-derived polyimide samples (PIS), prepared with different monomer ratios, are shown in Fig. S3. A characteristic aromatic absorption band at 1500 cm−1 was used as an internal reference due to the presence of benzene rings in all samples. As shown in Fig. 2(a), the FTIR spectra of BPAA and BPAAS exhibited characteristic absorption bands associated with the amide structure, including amide Ⅰ and Conclusion In summary, a novel waterborne PAAS sizing agent was developed through a dual dianhydride regulation strategy, in which rigid PMDA and flexible ODPA units were introduced to tailor the molecular architecture. The effects of dianhydride composition on the dispersion characteristics and thermal behavior of PAAS were systematically investigated, providing a basis for formulation selection. Among the investigated formulations, BPAAS (ODA: ODPA: PMDA = 2:1:1) exhibited a particle size of 158.0 nm CRediT authorship contribution statement Ziyi Xu: Writing – original draft, Methodology, Investigation, Formal analysis, Conceptualization. Yanxiang Wang: Writing – review & editing, Supervision, Resources, Investigation. Juying Li: Writing – review & editing, Supervision, Resources, Investigation. Jinghe Guo: Formal analysis, Conceptualization. Yanying Zhu: Methodology, Formal analysis. Yanru Yuan: Visualization, Investigation. Siao Xin: Writing – original draft, Resources. Yingfan Li: Methodology, Formal analysis. Dong Zhang: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Acknowledgments The authors thank the editor and the anonymous reviewers for their valuable comments on this manuscript. This work was funded by Key R&D Program of Shandong Province, China (2025TSGCCZZB0591, 2025TSGCCZZB0617, 2025CXGC010407), R&D Program of Jinan City, Shandong, China (202428014). Thanks to Shandong Gold Lead Machinery Co., Ltd. for the property’s analysis. Thanks to eceshi (www.eceshi.com) for the TG analysis. Thanks to Scientific Compass (www.shiyanjia.com) for invaluable assistance with the View full text References (27) · Y. Zhang et al. Molecularly engineered high-solid-content waterborne polyurethane for interfacial tailoring and intrinsic UV resistance of CF/PA6 composites Compos B Eng (2026) · A. Jean-Fulcrand et al. Degradation mechanisms of CF/PPS, CF/PEI, and CF/PEEK under combined UV radiation and condensation Compos A Appl Sci Manuf (2025) · S. Zhu et al. Effect of molecular weight of water-based sizing agents on CF processability and CF/PPS composite performance Chem Eng J (2025) · S.-S. Yao et al. Recent advances in carbon-fiber-reinforced thermoplastic composites: a review Compos B Eng (2018) · L. Liu et al. Interfacial characterization, control and modification of carbon fiber reinforced polymer composites Compos Sci Technol (2015) · N. Dilsiz et al. Surface analysis of unsized and sized carbon fibers Carbon (1999) · Y. Li et al. Interfacially reinforced carbon fiber silicone resin via constructing functional nano-structural silver Compos Sci Technol (2019) · N. Sun et al. Enhanced interfacial properties of carbon Fiber/Polyamide composites by in-situ synthesis of polyamide 6 on carbon fiber surface Appl Surf Sci (2022) · L. Liu et al. Effect of a rigid-flexible-rigid sizing agent on the mechanical enhancement of carbon fiber composites Compos B Eng (2026) · Y. Xie et al. Aromatic π–π interaction–driven sizing strategy for enhanced interfacial adhesion in carbon fiber/PPESK thermoplastic composites Compos A Appl Sci Manuf (2026) Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S1359835X26008973?via%3Dihub
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
P204 · P204-2