Industrial production and application of biologically produced short-chain diols and their catalytic upgrading for advan
These impurities can severely impair chemo-catalytic efficiency; for instance, basic nitrogen-containing compounds can poison the active acidic sites of solid catalysts, while inorganic salts and residual sugars accelerate structural degradation and coke formation. Therefore, establishing stringent downstream purification combined with the design of robust, poison-resistant catalysts is a critical
Skip to main contentSkip to article
Published by: Elsevier
Published by
Highlights
· •Biological production of short-chain diols offers a sustainable alternative to energy-intensive petrochemical routes.
· •Bio-based 1,4-BDO achieves up to 88% lower carbon emissions, while ongoing scale-up drives its economic competitiveness.
· •High-titer microbial fermentations (>135 g/L for 1,3-PDO and > 140 g/L for 1,4-BDO) demonstrate advancing commercial viability.
· •Stereospecific microbial biosynthesis of 2,3-BDO unlocks high-value applications in cosmetics, agriculture, and polyurethanes.
· •Catalytic upgrading of bio-derived diols provides a strategic roadmap for integrating them into advanced industrial value chains.
Abstract
Petro-based plastics are widely used in our daily life due to their advantages in terms of ease of processability, durability, and performance; however, the market demand for bio-based plastics is rapidly increasing due to the accumulated problems associated with petro-based plastics, such as the unstable supply and demand of non-renewable raw materials and carbon dioxide emissions. However, economic constraints currently limit the rapid replacement of existing plastics with bio-based plastics. Therefore, it is anticipated that biologically produced monomers with high economic efficiency will replace the current plastic market first, and the most promising candidates for such replacement are short-chain diols. According to reports so far, 1,3-propanediol, 1,4-butanediol, and 2,3-butanediol are known as materials that can be efficiently produced through biological methods using renewable biomass as a raw material. While previous reviews have extensively covered upstream bioprocessing and downstream recovery (DSP), this paper distinctly focuses on the industrial applications and market prospects of these bio-derived intermediates, bridged by their catalytic upgrading into advanced industrial products. These chemicals have two hydroxyl groups and are platform chemicals that could be used for a wide range of applications as well as bio-based plastics. In this review, we discuss microbial production of short-chain diols, their diverse industrial applications, chemo-catalytic conversion strategies, and prospects for market expansion based on the increased demand in the future. By examining the transformative bridge between bio-based platforms and high-value derivatives, we offer a strategic roadmap for integrating short-chain diols into sustainable industrial value chains.
Graphical abstract
Keywords
Bioplastics
;
1,3-propanediol
;
1,4-butanediol
;
2,3-butanediol
;
Biological production
;
Catalytic upgrading
;
Chemical conversion
Introduction
Petro-based plastics are the most traditionally used materials due to their advantages such as ease of processibility, durability, and performance. Currently, most plastics are produced from non-renewable raw materials, which causes major environmental problems such as carbon dioxide emissions (Hong and Chen, 2017; Jehanno and Sardon, 2019; Sardon and Dove, 2018). In addition, the issue of oil price instability threatens the sustainability of the non-renewable raw material-based plastics industry. For these reasons, technology development for the sustainable bio-based plastic industry is accelerating.
Currently, bioplastics account for less than 0.5% of the 431 million tons of plastics used annually (Bioplastics Market Development Bioplastics Market Development Update, 2025). However, although overall plastic production is slightly declining, bioplastics production continues to increase, which reflects the demand for environmentally friendly products and applications. According to the market status of bioplastics by use, the packaging (flexible + rigid) sector accounts for 950 k-tons, representing 41% of the total bioplastics, and the textile sector accounts for 490 k-tons. Global bio-based plastics production is projected to increase from 2.31 million tons in 2025 to 4.69 million tons in 2030 (Bioplastics Market Development Bioplastics Market Development Update, 2025).
Among the numerous monomers that could be used for bioplastic production, there are not many monomers that could be economically produced through biological methods thus far. The transition toward sustainable chemical manufacturing has significantly accelerated research into the biological production of platform chemicals and short-chain diols. Consequently, the majority of recent review literature has predominantly focused on the upstream biological processes—such as strain engineering, metabolic pathway optimization, and fermentation scalability—as well as the critical challenges of downstream processing (DSP) and product recovery (Hao et al., 2005; Liu et al., 2024; Xiu and Zeng, 2008). While achieving efficient fermentation and cost-effective DSP is undeniably crucial for commercial viability, critical bioprocessing factors including fermentation scalability and DSP have already been extensively covered elsewhere.
Therefore, this review deliberately limits its discussion on upstream fermentation and DSP. Instead, it bridges a critical gap in the literature by focusing primarily on the advanced industrial applications of these bio-derived intermediates and their catalytic upgrading pathways. It is anticipated that a few candidate monomers, known as short-chain diols, including 1,3-propanediol (PDO), 1,4-butanediol (BDO), and 2,3-butanediol (2,3-BDO), are not highly toxic to microorganisms and could thus be produced biologically with higher efficiency compared to chemical conversion (Burgard et al., 2016; Celinska and Grajek, 2009; Kurian, 2005; Song et al., 2019). These diols have two hydroxyl groups and are thus recognized as platform chemicals that could be used as raw materials for various bio-based plastics, derivatives, and specialty applications. In this review, we discuss the advantages of biological production of short-chain diols and comprehensively examine recent advancements in their chemo-catalytic transformations. Fully realizing this “catalytic bridge,” however, requires overcoming a critical technical challenge: the impact of fermentation-derived impurities on catalyst performance. Unlike highly purified petro-based feedstocks, bio-derived diols often contain trace amounts of residual proteins, amino acids, inorganic salts, and organic acids even after standard downstream processing. These impurities can severely impair chemo-catalytic efficiency; for instance, basic nitrogen-containing compounds can poison the active acidic sites of solid catalysts, while inorganic salts and residual sugars accelerate structural degradation and coke formation. Therefore, establishing stringent downstream purification combined with the design of robust, poison-resistant catalysts is a critical prerequisite for commercialization. By navigating these catalytic hurdles, this review provides a distinct perspective on how to fully unlock the commercial potential of bio-based platform chemicals across various industrial applications with a predicted market expansion.
Organizational access
Get full-text access by signing in with your organisation
Section snippets
1,3-Propanediol
1,3-Propanediol (1,3-PDO) exists in nature and is essentially an odorless and colorless viscous liquid. Conventionally, it was manufactured through chemical catalysis methods developed by Shell and Degussa (Kurian, 2005). 1,3-PDO can be produced from ethylene oxide or propylene via sequential chemical reactions under harsh conditions. These processes require expensive catalysts and generate numerous toxic byproducts (Fig. 1).
Biological production of 1,3-PDO using microorganisms has been well
Industrial applications of 1,3-PDO
1,3-PDO has been widely used commercially as a raw material for PTT, PO3G, UPR, lubricants for textiles, cosmetics, etc. (Fig. 2), and the total market size is expected to increase by 14.2% annually from USD 437 million in 2018 to USD 1442.77 million in 2027 (Da Silva Ruy et al., 2021). About 30% of 1,3-PDO is converted to PTT, and 21% is also used as polyols such as PO3G. 1,3-PDO, a representative bio-based raw material, is being widely applied to textiles and clothing that require sustainable
Industrial applications of 1,4-BDO
1,4-BDO is mostly applied to produce PBT, PBAT, PU, and GBL (Fig. 3), and it is reported that the market size will increase from USD 8.25 billion in 2026 to USD 16.08 billion in 2035, exhibiting a compound annual growth rate (CAGR) of 7.7% (Market Growth Reports, 2025). 1,4-BDO has a larger industrial scale compared to other diol raw materials; there is no difference in raw material characteristics depending on the production method, and thus bio-based 1,4-BDO is expected to penetrate the
Industrial applications of 2,3-BDO
2,3-BDO is produced by fermentation of microorganisms using glucose as a raw material and has three stereoisomers (Mania et al., 2022). The 2,3-BDO market size is expected to increase by 3.19% annually from USD 186 million in 2018 to USD 239 million in 2029 (Maximize Market Research, 2022). It is reported that Harden and Walpole produced it for the first time in 1906 using a Klebsiella pneumoniae strain. 2,3-BDO can be applied to polymers such as PA12, SBR, and polyurethanes, food additives
Conclusion
According to the recent eco-friendly trend, interest in the industrial biotechnology using renewable resources such as plants as raw materials rather than fossil fuels to produce biofuels and other products, is increasing. Recently, the market growth potential of the white bio industry is very large due to the strengthening of global environmental regulations and the increasing consumer interest in eco-friendly products. Bio-based products are still relatively expensive, and some products have
CRediT authorship contribution statement
Chan Woo Song: Writing – review & editing, Writing – original draft, Visualization, Validation, Methodology, Conceptualization. Dong Keun Yoo: Validation, Investigation, Data curation. Sang Chul Chung: Supervision, Project administration, Funding acquisition.
Declaration of competing interest
The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Chan Woo Song, Dong Keun Yoo, and Sang Chul Chung are employees of GS Caltex Corporation, which holds patents and commercial interests related to the production and application of 2,3-butanediol mentioned in this manuscript.
Acknowledgements
This research was supported by GS Caltex Corporation, Republic of Korea.
View full text
References (96)
· M. Affandy et al.
Production and catalytic upgrading of 2,3-butanediol fermentation broth into sustainable aviation fuel blendstock and fuel properties measurement
Fuel
(2023)
· E.J. Bartowsky et al.
The 'buttery' attribute of wine-diacetyl-desirability, spoilage and beyond
Int. J. Food Microbiol.
(2004)
· A. Burgard et al.
Development of a commercial scale process for production of 1,4-butanediol from sugar
Curr. Opin. Biotechnol.
(2016)
· C. Cai et al.
Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion
J. Mater. Process. Technol.
(2021)
· E. Celinska et al.
Biotechnological production of 2,3-butanediol-current state and prospects
Biotechnol. Adv.
(2009)
· X. Chen et al.
Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization
Polymer
(2023)
· M. Colonna et al.
New catalysts for poly(butylene terephthalate) synthesis
Polymer
(2003)
· A.D. Da Silva Ruy et al.
Catalysts for glycerol hydrogenolysis to 1,3-propanediol: a review of chemical routes and market
Catal. Today
(2021)
· H. Duan et al.
Dehydration of 2,3-butanediol into 3-buten-2-ol catalyzed by ZrO₂
Catal. Commun.
(2014)
· I. Engelberg et al.
Physico-mechanical properties of degradable polymers used in medical applications: a comparative study
Biomaterials
(1991)
Fermentative production of 2,3-butanediol: a review
Bioresour. Technol.
(1995)
The current strategies and parameters for the enhanced microbial production of 2,3-butanediol
Biotechnol. Rep.
(2020)
Microbial 2,3-butanediol production: a state-of-the-art review
Biotechnol. Adv.
(2011)
Unsaturated polyester resins, in: Brydson's Plastics Materials
(2017)
Effective bioconversion of 1,3-propanediol from biodiesel-derived crude glycerol using organic acid resistance-enhanced Lactobacillus reuteri JH83
Bioresour. Technol.
(2021)
Metabolic engineering of a novel Klebsiella oxytoca strain for enhanced 2,3-butanediol production
J. Biosci. Bioeng.
(2013)
Production of 2,3-butanediol by engineered Saccharomyces cerevisiae
Bioresour. Technol.
(2013)
Advances in biosynthesis and downstream processing of diols
Biotechnol. Adv.
(2024)
Metabolic engineering for the microbial production of 1,3-propanediol
Curr. Opin. Biotechnol.
(2003)
Dehydration of 2,3-butanediol to produce 1,3-butadiene over Sc₂O₃ catalyst prepared through hydrothermal aging
Mol. Catal.
(2021)
Improvement of dynamic tensile properties of poly(lactic acid)/poly(butylene adipate-co-terephthalate) polymer alloys using a crosslinking agent and observation of fracture surfaces
Int. J. Impact Eng.
(2015)
Mechanical performance of non-reinforced, carbon fiber reinforced and glass bubbles reinforced 3D printed PA12 polyamide
Polym. Test.
(2023)
Development of polyvinylpyrrolidone-based nanomaterials for biosensor applications: a review
Inorg. Chem. Commun.
(2023)
Isosorbide as the structural component of bio-based unsaturated polyesters for use as thermosetting resins
Carbohydr. Polym.
(2014)
Successful nonfreezing, subzero preservation of rat liver with 2,3-butanediol and type I antifreeze protein
J. Surg. Res.
(2001)
Trends in sustainable biobased packaging materials: a mini review
Mater. Today Sustain.
(2021)
Systems metabolic engineering of Klebsiella pneumoniae for high-level 1,3-propanediol production
Metab. Eng.
(2026)
Isolation and characterization of a Klebsiella pneumoniae strain from mangrove sediment for efficient biosynthesis of 1,3-propanediol
Sci. Bull.
(2015)
Optimizing the mechanical properties of TiO2/PA12 nano-composites fabricated by SLS 3D printing
Polym. Eng. Sci.
(2023)
Production of liquefied oil palm empty fruit bunch based polyols via microwave heating
Energy Fuel
(2017)
Biomass-based polyols through oxypropylation reaction
ChemSusChem
(2012)
Composition containing meso-2,3-butanediol
(2016)
Spin-finish usage and compounding for man-made fibers
Polym.-Plast. Technol. Eng.
(1974)
Process for the production of n-methyl-pyrrolidone using gamma butyrolactone and mixed methylamines as starting materials
(2006)
Bioplastics Market Development Update
(2025)
Achievements and perspectives in 1,4-butanediol production from engineered microorganisms
J. Agric. Food Chem.
(2021)
High-titer, antibiotic-free, pilot-scale production of 1,3-propanediol by engineered Corynebacterium glutamicum
Nat. Chem. Eng.
(2026)
2R,3R-butanediol, a bacterial volatile produced by Pseudomonas chlororaphis O6, is involved in induction of systemic tolerance to drought in Arabidopsis thaliana
Mol. Plant-Microbe Interact.
(2008)
Orientation and structure development in poly(trimethylene terephthalate) tensile drawing
Macromolecules
(2001)
Emulsion styrene-butadiene rubber
(2003)
Global Poly(Trimethylene Terephthalate) (PTT) Market Size, Status and Forecast 2021–2027
(2021)
Enhancement of disease control efficacy of chemical fungicides combined with plant resistance inducer 2,3-butanediol against turfgrass fungal diseases
Plant Pathol. J.
(2022)
2,3-Butanediol as a biobased chain extender for thermoplastic polyurethanes: influence of stereochemistry on macromolecular architectures and properties
Macromolecules
(2022)
Microstructure and properties of poly(butylene terephthalate)/poly(ethylene terephthalate) composites based on carbon nanotubes/graphene nanoplatelets hybrid filler systems
J. Appl. Polym. Sci.
(2022)
Butanediols, butenediol, and butynediol, in: Ullmann's Encyclopedia of Industrial Chemistry
(2012)
Downstream processing of 1,3-propanediol fermentation broth
J. Chem. Technol. Biotechnol.
(2005)
Renewable sourced polytrimethylene ether glycol by superacid catalyzed condensation of 1,3-propanediol
Green Chem.
(2010)
Renewable gasoline, solvents, and fuel additives from 2,3-butanediol
ChemSusChem
(2016)
Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S2589014X26006663
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。