Mechanically Strong, Tough, Flame-Retardant, and Recyclable Poly(urethane-urea) Elastomers Enabled by Dynamic Diels-Alde
Wang et al. developed a bio-based P/N/Si-containing flame retardant (DETS) from protocatechualdehyde, which was covalently incorporated into waterborne polyurethane (WPU) by forming an internally cross-linked network [29]. The resulting WPU/DETS composites exhibited an increased LOI of 27.7%, while cone calorimetry tests showed that the peak heat release rate and smoke production rate were reduced
Skip to main contentSkip to article
Published by: Elsevier
Published by
Highlights
· •Excellent Mechanical Properties: High tensile strength of 49.2 MPa with outstanding toughness.
· •Repairability and Recyclability: Reversible Diels-Alder reaction enables efficient repair and recycling.
· •Improved Fire Safety: Higher LOI value and 31.0% reduction in PHRR.
· •Carbon Fiber Recovery: Dynamic matrix degradation enables efficient carbon fiber recovery and reuse.
Abstract
With the expanding application of polyurethane elastomers, developing recyclable flame-retardant materials with excellent mechanical performance has become increasingly important. Herein, phosphorus-containing maleimide derivatives were synthesized from 4-maleimidophenol and phosphoryl chlorides and, together with the bio-based phosphorus-containing diol HMF-DOPO, incorporated into poly(urethane-urea) (PUA) networks. Thermoreversible Diels-Alder (DA) reactions were employed to construct dynamic covalent crosslinks, yielding intrinsically flame-retardant, repairable, and recyclable PUA elastomers. The resulting materials exhibited excellent tensile properties, elastic recovery, cyclic stability, thermally induced repairability, and solvent-assisted recyclability, with recycled samples retaining more than 90% of their initial tensile strength. The covalently incorporated phosphorus-containing structures markedly improved fire safety. In particular, PUA-HMF-BPOMP achieved a limiting oxygen index (LOI) of 27% and a UL-94 V-0 rating, while its peak heat release rate (PHRR) and total heat release (THR) were reduced by 31.0% and 27.3%, respectively, compared with pure PUA. Furthermore, PUA-HMF-BPOMP was employed as the matrix for carbon fiber-reinforced composites, which exhibited excellent mechanical performance and enhanced flame retardancy. Controlled degradation of the dynamic crosslinked matrix enabled efficient carbon fiber recovery with minimal structural damage and negligible mechanical loss. The recovered fibers retained excellent structural integrity and mechanical performance and were successfully reused to fabricate recycled carbon fiber-reinforced composites. This work presents an integrated molecular-design strategy that combines mechanical robustness, intrinsic flame retardancy, dynamic repairability, recyclability, and high-value carbon fiber recovery, offering a promising route toward sustainable polyurethane elastomers and circular fiber-reinforced composites, without compromising their overall multifunctional performance in use.
Keywords
Poly(urethane-urea)
;
Dynamic bonds
;
Diels-Alder reaction
;
Flame retardant
;
Carbon fiber-reinforced polymer composites
Introduction
Polyurethane elastomers are widely used in coatings, transportation, building materials, impact protection, and flexible electronics owing to their tunable structures, excellent mechanical properties, abrasion resistance, and chemical stability [[1], [2], [3]]. However, conventional polyurethane networks, especially chemically cross-linked systems, are difficult to reprocess or recycle after service, causing resource waste and environmental concerns. Moreover, polyurethanes are intrinsically flammable and can generate intense heat, dense smoke, and toxic gases during combustion, limiting their use in fire-sensitive applications [4,5]. Therefore, developing recyclable polyurethane elastomers with improved flame retardancy is highly desirable.
The incorporation of dynamic bonds into polyurethane networks provides an effective strategy for improving the recyclability and service durability of cross-linked polymers [[6], [7], [8]]. Dynamic non-covalent interactions, such as hydrogen bonding, metal–ligand coordination, ionic interactions, and π–π stacking, can endow materials with reversible association and self-healing capability [9,10]. Compared with these relatively weak interactions, dynamic covalent bonds provide more robust yet reversible network rearrangement, enabling repair, reprocessing, stress relaxation, and recycling under external stimuli [11,12]. Typical dynamic covalent reactions include imine exchange [13,14], disulfide exchange [15,16], transesterification [17,18], and Diels-Alder (DA) reaction [19,20]. Among them, the furan/maleimide Diels-Alder reaction is particularly noteworthy because it can form thermally reversible cross-links through the [4+2] cycloaddition reaction [21,22]. The DA adducts dissociate via the retro-DA reaction at elevated temperatures and reform during cooling, allowing reversible network reconstruction without additional catalysts or significant by-products [23,24]. This feature makes DA chemistry highly suitable for the design of sustainable polyurethane networks. Moreover, applying recyclable dynamic polymer networks to high-performance composites remains challenging. Carbon fiber-reinforced polymer composites (CFRPs) are widely used in lightweight vehicles, wind turbine blades, and aerospace structures [25,26]. However, their cross-linked thermosetting matrices make matrix degradation and carbon fiber recovery difficult after service. Therefore, dynamic polyurethane networks provide a promising matrix platform for recyclable CFRPs, enabling reversible matrix dissociation and recovery of carbon fibers with minimal damage [27,28].
Meanwhile, enhancing the flame retardancy of polyurethane elastomers requires rational molecular design. Compared with additive flame retardants, intrinsic flame-retardant modification is more favorable for long-term applications because flame-retardant units are covalently incorporated into the polymer backbone or cross-linked network, thereby reducing migration, volatilization, and deterioration of mechanical properties [29,30]. Among various phosphorus-containing structures, 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and phosphoryl chloride/phosphonyl chloride derivatives are particularly useful reactive building blocks due to their high reactivity, structural tunability, and efficient flame-retardant performance [31]. Wang et al. developed a bio-based P/N/Si-containing flame retardant (DETS) from protocatechualdehyde, which was covalently incorporated into waterborne polyurethane (WPU) by forming an internally cross-linked network [29]. The resulting WPU/DETS composites exhibited an increased LOI of 27.7%, while cone calorimetry tests showed that the peak heat release rate and smoke production rate were reduced by 46.6% and 57.1%, respectively. Tian et al. synthesized a vanillin-derived phosphorus-containing multifunctional hexahydric alcohol (PV-OH) bearing flame-retardant groups and reversible imine bonds [32]. The obtained cross-linked polyurethane elastomer, PPU-40 achieved V-0 rating in UL-94 test with an LOI of 29.2%. Similarly, Ding et al. prepared a vanillin-derived phosphorus-containing diol (VDP) and incorporated it into the polyurethane backbone [33]. The LOI of the resulting PU-VDP-P1.0 elastomers increased from 23% to 30%, and a UL-94 V-0 rating was achieved. Moreover, the elastomers retained 98.6% of their mechanical properties after repeated hot pressing and solvent-assisted recycling.
Herein, HMF-DOPO, a bio-based phosphorus-containing diol, was synthesized from 5-hydroxymethylfurfural and DOPO and incorporated into the main chain of polyurethane-urea elastomers. Phosphorus-containing maleimide derivatives (BPOMP, PDCMP, and POCMP) were then prepared from 4-maleimidophenol and phosphoryl chloride compounds and further reacted with the furan groups of HMF-DOPO via reversible Diels-Alder (DA) reactions to construct dynamic covalent networks. Compared with previously reported flame-retardant polyurethane elastomers containing dynamic covalent networks, the present molecular design integrates flame-retardant functionalities directly into the reversible crosslinking components. Specifically, HMF-DOPO provides both phosphorus-containing structures and reactive furan groups, while the phosphorus-containing maleimide derivatives serve as additional flame-retardant units and dynamic crosslinking components. This integrated molecular design enables the simultaneous regulation of mechanical properties, flame retardancy, and network reversibility. The effects of different phosphorus-containing structures on flame retardancy and the influence of dynamic DA crosslinking structures on mechanical properties, thermal reprocessing, and recyclability were systematically investigated. Furthermore, the optimized elastomer was employed as a matrix for carbon fiber-reinforced composites to improve fire safety and enable carbon fiber recovery. This work provides a feasible strategy for developing sustainable polyurethane-urea-based materials with integrated flame retardancy, mechanical robustness, recyclability, and applicability in CFRPs.
Organizational access
Get full-text access by signing in with your organisation
Section snippets
Experimental section
The experimental details for the preparation of the bio-based phosphorus-containing diol (HMF-DOPO), phosphorus-containing maleimide derivatives (BPOMP, PDCMP, and POCMP), and polyurethane-urea (PUA) elastomers, as well as their characterization, are provided in the Supporting Information. The synthesis of PUA elastomer was illustrated in Figure 1, and its formulation was summarized in Table S1.
Preparation and Material Characterization
The carbonyl carbon in aldehyde groups is highly electrophilic and can readily undergo addition reactions with active hydrogen-containing compounds. HMF contains the reactive aldehyde group that can react with the P-H bond of DOPO to form the bio-based phosphorus-containing diol HMF-DOPO. The chemical structure of HMF-DOPO was confirmed by NMR spectroscopy. As shown in Figure S1, the 1H NMR spectrum of HMF-DOPO exhibited a characteristic signal at 4.31 ppm assigned to the methylene protons (-CH2
Conclusion
In this study, intrinsically flame-retardant and recyclable poly(urethane–urea) elastomers were successfully developed based on the dynamic Diels-Alder reaction. The PUA elastomers exhibited excellent comprehensive properties, including high tensile strength, thermal repairability, reprocessability, recyclability, and intrinsic flame retardancy. Owing to the thermoreversible DA reaction, the elastomers showed typical stress-relaxation behavior and could be effectively repaired and reprocessed
CRediT authorship contribution statement
Hongliang Ding: Writing – original draft, Methodology, Investigation, Data curation. Lini Wu: Data curation. Bicheng Lin: Data curation. Hongfei He: Formal analysis. Feng Zhao: Investigation. Jiachen Zhu: Investigation. Lu Liu: Writing – review & editing, Formal analysis. Junling Wang: Resources, Data curation. Weiguang An: Writing – review & editing. Bin Yu: Writing – review & editing, Supervision, Resources, Funding acquisition.
Declaration of competing interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Acknowledgements
This work was supported by the National Natural Science Foundation of China (No.22575238, 52321003), the National Science Fund for Excellent Young Scholars of China (Overseas, GG2320007003), the Anhui Province Science and Technology Breakthrough Plan Project (No.202423i08050016), the Experimental Center of Engineering and Materials Sciences from University of Science and Technology of China, and the USTC Center for Micro and Nanoscale Research and Fabrication.
View full text
References (59)
· S. Wu et al.
A comprehensive review of polyurethane: properties, applications and future perspectives
Polymer
(2025)
· J. Wang et al.
Engineered phosphorus-nitrogen-silicon segments enabling strong, tough and flame retardant polyurea for application in stretchable electrode devices
Chem. Eng. J.
(2025)
· H. Ding et al.
Highly transparent, mechanically strong, recyclable, and flame-retardant vanillin-modified poly (urethane-urea) elastomers via dynamic oxime-urethane bonds and hydrogen bonds
Chem. Eng. J.
(2025)
· M.R. Gholizadeh et al.
Sustainable polymers: Recycling and reprocessing mechanisms using reversible and dynamic covalent bonds
Materials Science and Engineering: R: Reports
(2026)
· H. Sharma et al.
Reprocessable carbon fiber composites via disulfide-exchange epoxy vitrimers: experimental and molecular simulation insights
RSC Adv
(2026)
· R. Xu et al.
Dynamic transesterification network toughening polylactic acid based on epoxidized soybean oil
Eur. Polym. J.
(2025)
· Q. Liao et al.
Fabrication of high-performance bio-based cellulose/polyurethane composites via Diels-Alder reaction: wide temperature adaptability, self-healing, and sensing properties
Chem. Eng. J.
(2025)
· G. Misiakos et al.
Dually dynamic printable Diels–Alder polyurethane networks with robust recyclability, self-healing, and shape memory
Chem. Eng. J.
(2026)
· X. Xu et al.
Material performance, manufacturing methods, and engineering applications in aviation of carbon fiber reinforced polymers: a comprehensive review
Thin-Walled Struct
(2025)
· S. Wang et al.
High-toughness polyurethane elastomers for recyclable carbon fiber-reinforced composites with excellent tear resistance
Composites, Part A
(2025)
Tough, high-strength, flame-retardant and recyclable polyurethane elastomers based on dynamic borate acid esters
React. Funct. Polym.
(2024)
Toward sustainable, flame-retardant, antimicrobial, and cross-linked waterborne polyurethane via intrinsic modification with a fully biobased chain extender
Chem. Eng. J.
(2026)
Organic phosphorus chemistry for fire-safe polymeric materials: Research progress and future perspectives
Prog. Polym. Sci.
(2026)
Robust cross-linked polyurethane elastomers with reprocessing capabilities and flame-retardant from renewable vanillin
Polym. Degrad. Stab.
(2025)
From a bio-based polyphenol diol intermedia to high-performance polyurethane elastomer: Thermal stability, reprocessability and flame retardancy
J. Colloid Interface Sci.
(2025)
Castor-oil-based, robust, self-healing, shape memory, and reprocessable polymers enabled by dynamic hindered urea bonds and hydrogen bonds
Chem. Eng. J.
(2022)
Synergistic thermodynamic compatibility of polydimethylsiloxane block in thermoplastic polyurethane for flame retardant materials: Super flexible, highly flame retardant and low smoke release
Polymer
(2022)
Synthesis of reactive DOPO-based flame retardant and its application in polyurethane elastomers
Polym. Degrad. Stab.
(2021)
Mechanically robust self-healing and recyclable flame-retarded polyurethane elastomer based on thermoreversible crosslinking network and multiple hydrogen bonds
Chem. Eng. J.
(2020)
An exceptional strength, self-healing and recyclability polyurethane elastomers via multiple hydrogen bonds optimization strategy
Appl. Surf. Sci.
(2024)
Fabrication of high-strength and self-healing polyurethane composites via Diels–Alder dynamic bonds for sustainable thermal management materials
RSC Adv
(2026)
Theoretical study on the effect of oxidation states of phosphorus flame retardants on their mode of action
Polym. Degrad. Stab.
(2024)
Biomimetic, highly adhesive, self-repairing and fire-protective polymeric coatings for polyurethane foam
Chem. Eng. J.
(2025)
“Rigid-Flexible” structured polyimine/graphite felt composites with excellent fire Resistance, electromagnetic shielding and recyclability
Chem. Eng. J.
(2024)
Advanced phase-targeted flame retardancy and efficient smoke suppression via a dual-valent phosphorus strategy in polyurethane composites
Chin. J. Chem. Eng.
(2026)
Construction of a novel Schiff structure curing agent endowing vitrimer with excellent inherent flame-retardant properties, char-forming capability, toughness, and degradation performance
Compos. Part B-Eng.
(2027)
Transparent, flame-retarded, self-healable, mechanically strong polyurethane elastomers: enabled by the synthesis of phosphorus/nitrogen-containing oxime chain-extender
J. Appl. Polym. Sci.
(2022)
Molecular engineering of a colorless, extremely tough, superiorly self-recoverable, and healable poly(urethane-urea) elastomer for impact-resistant applications
Mater. Horiz.
(2021)
Dynamic decrosslinking enables self-healing, reprocessability, and upcycling in polyurethane networks
Nat. Commun.
(2026)
Persistent link using digital object identifier (DOI)
原文出处:https://www.sciencedirect.com/science/article/abs/pii/S0141391026006774?via%3Dihub
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。
提示:本站仅汇集公开信息,版权归原作者与原发布媒体所有。